Free Delivery on all orders over £99*

Albatre Alabaster LED Wall Light 800mm - Brass

£35399
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Albatre linear wall sconce pairs a 920mm alabaster bar with a brass frame, housing an integrated 18W LED strip that casts 300 lumens of 3000K warm white light through the natural stone. The alabaster diffuser softens the LED source and creates an even wash of light along the wall, while the brass frame provides structural support at both ends and adds a warm metallic accent.

Designed for bathrooms, bedrooms and hallways where horizontal wall lighting is preferred over pendant or ceiling fixtures, this wall light fits directly onto the wall via a rear-mounted plate. The 920mm length suits mounting above a vanity unit, along a corridor wall, or above a headboard as reading light. The IP20 rating makes it suitable for general bathroom zones (not within 600mm of a shower head or bath edge) and any standard interior space.

The alabaster bar shows natural mineral veining and tonal variation depending on the section of stone it was cut from, so each fitting has a slightly different appearance when lit. The non-dimmable LED runs on 220-240V AC mains and delivers a colour rendering index of 90 CRI, which is high enough for accurate colour perception in bathrooms and dressing areas. The brass finish on the frame provides a warm tone that pairs well with both contemporary and classical interiors.

Specification
Wattage 18W
Lumens 300 Lm
Colour Temperature 3000K
IP Rating IP20
Beam Angle 180°
CRI 90 CRI
Voltage 50Hz AC 220-240V
Dimmable No
Material Metal, Alabaster
Finish Brass
Energy Class G
Length 920mm
Downloads
Frequently Asked

Is this dimmable?

No. The integrated 18W LED is non-dimmable and runs at a fixed output on 220-240V mains. Attempting to pair it with a dimmer switch will likely cause flickering or damage to the LED driver.

Can it be used in a bathroom?

The IP20 rating makes it suitable for general bathroom zones away from direct water contact. Do not install within 600mm of a shower head, bath edge or basin tap where water spray is likely. For bathroom zones 1 and 2, a higher IP-rated fitting is required.

Does the alabaster vary between fittings?

Yes. Each alabaster bar is cut from natural stone, so the veining, tonal variation and translucency differ between individual pieces. This is a characteristic of the natural material, not a defect.

What colour temperature is the LED?

The integrated LED is rated at 3000K, which is a warm white tone similar to halogen bulbs. This colour temperature suits bathrooms, bedrooms and living areas where warmer light is preferred over cooler daylight tones.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

Our Reviews

From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

Featured Projects

Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

Description

The Albatre linear wall sconce pairs a 920mm alabaster bar with a brass frame, housing an integrated 18W LED strip that casts 300 lumens of 3000K warm white light through the natural stone. The alabaster diffuser softens the LED source and creates an even wash of light along the wall, while the brass frame provides structural support at both ends and adds a warm metallic accent.

Designed for bathrooms, bedrooms and hallways where horizontal wall lighting is preferred over pendant or ceiling fixtures, this wall light fits directly onto the wall via a rear-mounted plate. The 920mm length suits mounting above a vanity unit, along a corridor wall, or above a headboard as reading light. The IP20 rating makes it suitable for general bathroom zones (not within 600mm of a shower head or bath edge) and any standard interior space.

The alabaster bar shows natural mineral veining and tonal variation depending on the section of stone it was cut from, so each fitting has a slightly different appearance when lit. The non-dimmable LED runs on 220-240V AC mains and delivers a colour rendering index of 90 CRI, which is high enough for accurate colour perception in bathrooms and dressing areas. The brass finish on the frame provides a warm tone that pairs well with both contemporary and classical interiors.

Specification
Wattage 18W
Lumens 300 Lm
Colour Temperature 3000K
IP Rating IP20
Beam Angle 180°
CRI 90 CRI
Voltage 50Hz AC 220-240V
Dimmable No
Material Metal, Alabaster
Finish Brass
Energy Class G
Length 920mm
Downloads
Frequently Asked

Is this dimmable?

No. The integrated 18W LED is non-dimmable and runs at a fixed output on 220-240V mains. Attempting to pair it with a dimmer switch will likely cause flickering or damage to the LED driver.

Can it be used in a bathroom?

The IP20 rating makes it suitable for general bathroom zones away from direct water contact. Do not install within 600mm of a shower head, bath edge or basin tap where water spray is likely. For bathroom zones 1 and 2, a higher IP-rated fitting is required.

Does the alabaster vary between fittings?

Yes. Each alabaster bar is cut from natural stone, so the veining, tonal variation and translucency differ between individual pieces. This is a characteristic of the natural material, not a defect.

What colour temperature is the LED?

The integrated LED is rated at 3000K, which is a warm white tone similar to halogen bulbs. This colour temperature suits bathrooms, bedrooms and living areas where warmer light is preferred over cooler daylight tones.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.