Description
The ONDA is an 18W LED track spotlight in matt black aluminium, delivering 1370 lumens at 3000K through a 120° beam angle. The integrated LED module sits behind a recessed lens, giving wide flood coverage rather than narrow spot focus. The CRI of 90 means colour rendering is accurate enough for retail display, gallery walls, and residential accent lighting where fabric tones and artwork need to appear natural.
Designed for single-circuit track systems, the spotlight clips onto standard track rails without tools and can be repositioned along the track run or angled towards walls, artwork, or product displays. The 120° beam provides general illumination across a 2-3m section of wall or ceiling rather than tight spotlighting, making the ONDA suitable for lighting shelving runs, picture rails, or open-plan kitchen ceilings where multiple units are spaced at 1-1.5m intervals.
The aluminium body dissipates LED heat without needing additional cooling fins or visible vents, keeping the external surface temperature low enough to handle once the unit has been running for several hours. The matt black finish minimises reflections under daylight and pairs with both black and white track rail systems. The non-dimmable driver suits installations where fixed output is acceptable and dimming infrastructure is not already in place.
Specification
| Wattage |
18 W |
| Lumens |
1370 Lm |
| Colour temperature |
3000 K |
| IP rating |
IP 20 |
| Beam angle |
120° |
| CRI |
90 CRI |
| Voltage |
50Hz AC 220-240 V |
| Dimmable |
No |
| Material |
Aluminium |
| Finish |
Black |
| Energy class |
F |
Downloads
Product datasheet
Frequently Asked
Is this spotlight dimmable?
No. The integrated LED driver does not support dimming. If dimming is required, consider track systems with DALI or 0-10V dimming protocols that use compatible dimmable track spotlights.
What track system does it fit?
The ONDA fits standard single-circuit track rails. Check that your existing track system uses the same connector standard - track fittings are compatible with most European single-circuit rails but may not fit proprietary or three-circuit systems without an adapter.
What's the beam angle suited for?
The 120° beam provides wide flood coverage rather than narrow accent lighting. This makes the ONDA better suited to general wall washing, shelving illumination, or ceiling fill than tight spotlighting of individual objects.
Can it be used in bathrooms?
The IP20 rating means the spotlight is not protected against water ingress. It is suitable for dry interior spaces only - not bathrooms, kitchens near sinks, or any area where moisture or steam is present.