Points 18W LED Track Luminaire - Black

The Points is an 18W LED track luminaire housing a recessed array of individual LED modules behind a matt black aluminium body. The fitting runs on 48V AC track systems and delivers a 36° beam angle for focused accent lighting or task illumination. The linear form measures approximately 600mm in length, making it suitable for illuminating gallery walls, retail displays, kitchen worktops and office desks where directional light is needed without ceiling recess work.

Designed for track lighting systems rather than direct ceiling mounting, the luminaire clips onto compatible 48V AC track rails and can be repositioned along the track as lighting needs change. The 36° beam focuses light onto specific zones without spilling onto adjacent surfaces, making it useful for highlighting artwork, merchandise or work surfaces while leaving surrounding areas darker. The dimmable LED allows output to be adjusted depending on time of day or task requirements.

The black aluminium body dissipates heat from the LED modules without needing external cooling fins, keeping the profile compact at approximately 75mm wide by 60mm deep. The recessed LED arrangement behind frosted diffusers softens the light output and reduces glare compared to exposed bulb arrays. The IP20 rating confirms the fitting is designed for dry indoor environments only and should not be used in bathrooms, kitchens near sinks, or any outdoor installation.

The 48V AC track system voltage separates this from standard 230V mains track lighting - the luminaire requires a compatible track rail and a separate transformer/driver unit that converts 230V mains down to 48V AC. This lower voltage system is often preferred in residential and hospitality settings for safety reasons, particularly where track lighting runs close to accessible areas.

Energy label

Does this fit standard mains track systems?

No. The Points requires a 48V AC track system, not standard 230V mains track. You need a compatible track rail and a separate transformer to convert mains voltage down to 48V AC. Check compatibility before purchasing if you have existing track installed.

What dimmer is needed?

Dimming is controlled at the transformer/driver level, not at the luminaire. You need a dimmable 48V AC track driver compatible with your dimmer switch type. Consult or your electrician to confirm driver and dimmer pairing.

What length is the luminaire?

The Points measures approximately 600mm in length. produces this model in multiple lengths - check the full Points range if a different size is needed.

Can it be used in a kitchen?

The IP20 rating means it is suitable for dry indoor areas only. It can be used in kitchens away from sinks, hobs and steam sources, but not directly above worktops where water splashes or steam may contact the fitting.