Description
The Sleek is an outdoor wall sconce formed from a curved tubular arm of graphite-finish stainless steel, with an integrated 2W 3000K LED housed in the downward-facing cylindrical head. The IP65 rating seals the fitting against dust ingress and water jets from any direction, making it suitable for external walls exposed to UK weather year-round.
Designed for pathway lighting, entrance porches, and garage sides where a defined pool of warm white light is needed on the ground directly below the fitting, the Sleek casts a 60-degree beam angle from its single LED source. The 150-lumen output provides wayfinding light rather than area illumination, so two or more fittings are typically installed on opposite walls or spaced along a path to achieve even coverage. The low 2W power draw allows multiple units to run from a single outdoor lighting circuit without overloading transformers or exceeding cable ratings.
The graphite finish on the stainless steel body provides a near-black tone that recedes against dark render, slate cladding, or painted masonry, while the curved tubular arm and circular wall plate give the fitting a sculptural profile when viewed from the side. The downward orientation of the cylindrical head keeps direct light out of sight lines when approaching the wall, reducing glare for anyone walking past. The 90 CRI LED rendering preserves natural colour tones in brickwork, planting, and paving without the yellow or blue shifts common in lower-quality outdoor LEDs.
Specification
| Wattage |
2W |
| Lumens |
150 Lm |
| Colour Temperature |
3000K |
| IP Rating |
IP65 |
| Beam Angle |
60° |
| CRI |
90 CRI |
| Voltage |
50Hz AC 220-240V |
| Dimmable |
No |
| Material |
Stainless Steel |
| Finish |
Graphite |
| Energy Class |
G |
Downloads
Product datasheet
Frequently Asked
Is the Sleek suitable for coastal locations?
The stainless steel construction and IP65 rating provide good resistance to moisture and rain, but stainless steel in coastal environments can still develop surface corrosion over time from salt spray. Regular rinsing with fresh water helps preserve the graphite finish near the coast.
Can it be installed face-up or only face-down?
The Sleek is designed as a downlight with the cylindrical head angled towards the ground. Installing it face-up would allow water to collect inside the head aperture and compromise the IP65 seal, so downward orientation is required.
What area does the 150-lumen output illuminate?
The 2W LED and 150-lumen output create a defined pool of light approximately 1.5-2m in diameter directly below the fitting when mounted at typical door-height of 1.8-2.2m. This suits pathway wayfinding and entrance lighting rather than broad area coverage.
Does it require a dedicated outdoor circuit?
The Sleek runs on standard 220-240V mains and can be wired into an existing outdoor lighting circuit or spur. The 2W power draw is low enough that multiple units can share a single circuit without overloading typical 6A outdoor lighting breakers.