Latticea LED Outdoor Wall Light 6W 3000K - Brown

The Latticea mesh outdoor wall sconce pairs a cylindrical brown aluminium frame with a diamond-pattern steel mesh cage and an integrated 6W 3000K LED mounted at the top. The mesh cage allows light to project downward and outward through the diamond openings, creating a patterned wash on the wall behind and the ground below. The IP54 rating protects against dust ingress and water splashes, making the fitting suitable for covered porches, patio walls, and entrance areas where direct rainfall is minimal.

Designed for path lighting, entrance illumination, and architectural accent on garden walls, the fitting provides 190 lumens with a 110° beam angle that spreads light across a 2-3m horizontal span when mounted 1.8-2.2m above ground. The brown finish blends with terracotta, brick, and timber cladding in traditional and Mediterranean-style exteriors. The cylindrical form sits 250mm tall with a projection of approximately 120mm from the mounting surface, giving enough clearance to avoid heat buildup against the wall without protruding excessively into walkways.

The aluminium construction resists corrosion in UK coastal and suburban conditions, while the mesh cage is powder-coated to match the brown frame. The integrated LED is non-replaceable but rated for 25,000+ hours of use, equivalent to approximately 11 years at 6 hours per night. The 3000K colour temperature produces warm white light comparable to halogen, and the 90 CRI ensures accurate colour rendering for plants, foliage, and building materials under evening lighting.

Energy label

Can this be used in fully exposed outdoor areas?

The IP54 rating protects against dust and water splashes, but not direct rainfall or submersion. The fitting is suitable for covered porches, under eaves, and patio walls where it receives overhead shelter. For fully exposed locations, an IP65 or higher rating is recommended.

Is the LED replaceable?

No. The 6W LED is integrated into the fitting and cannot be replaced. However, the LED is rated for 25,000+ hours, which equates to approximately 11 years of use at 6 hours per night.

What mounting height is recommended?

The 110° beam angle and 190-lumen output suit mounting heights of 1.8-2.2m above ground level. This places the light at a comfortable level for path illumination and entrance lighting without glare at eye level.

Does the mesh cage affect light output?

Yes. The diamond mesh pattern allows light to pass through the cage openings while casting a decorative shadow pattern on the wall and ground. This reduces direct lumen output slightly but adds visual interest to the lighting effect.