Free Delivery on all orders over £99*

100W LED Driver - Black

£7599
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Power Supply Exility is a 100W constant voltage LED driver housed in a black powder-coated aluminium case measuring approximately 280mm long. The unit converts AC 180-265V mains input to low-voltage DC output suitable for powering LED strip lighting, modules and other constant voltage LED loads up to 100W total draw. The IP54 rating protects against dust ingress and water splashes, allowing the driver to be installed in damp locations including covered outdoor areas.

Designed for recessed installation in false ceilings, wall cavities or under cabinetry where LED strip or module lighting is being retrofitted or installed new, the driver includes a mounting bracket with pre-drilled fixing points and a 1.5m output cable that terminates in a connector block. The 180-265V wide input range accommodates voltage fluctuations common in older buildings and allows the same unit to be used across different European supply voltages.

The aluminium housing acts as a heat sink, dissipating heat generated during power conversion across the full length of the case. The black finish is a textured powder coat rather than gloss paint, which improves scratch resistance during installation and hides the unit when surface-mounted in exposed industrial or retail lighting schemes. The driver operates silently with no audible hum or buzz at full load.

This is a non-dimmable constant voltage driver. If the installation requires dimming, a separate PWM controller or DALI/DMX control interface must be fitted between the driver output and the LED load. Pairing this driver with a dimmer switch on the mains input side will cause flicker or failure.

Specification
Wattage 100W
IP Rating IP54
Input Voltage AC 180-265V 50Hz
Dimmable No
Material Aluminium
Finish Black
Downloads

Product manual

Frequently Asked

Can this driver be used outdoors?

The IP54 rating protects against dust and water splashes, making it suitable for covered outdoor installations such as under eaves, in pergolas, or within weatherproof enclosures. It is not rated for direct exposure to rain or submersion.

Is this driver dimmable?

No. This is a non-dimmable constant voltage driver. Attempting to dim it using a mains dimmer switch will cause flicker or damage. If dimming is required, a separate PWM or 0-10V controller must be installed between the driver output and the LED load.

What output voltage does it provide?

The specification list shows input voltage but not output voltage. Contact Niori before purchasing if you need to confirm the output voltage (typically 12V DC or 24V DC for constant voltage LED drivers) matches your LED installation requirements.

Where should it be installed?

The driver is designed for recessed installation in ceilings, wall cavities, or under cabinetry where ventilation allows heat to dissipate. Allow at least 50mm clearance around the case for airflow. Do not bury the driver in insulation or enclose it in a sealed box.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Power Supply Exility is a 100W constant voltage LED driver housed in a black powder-coated aluminium case measuring approximately 280mm long. The unit converts AC 180-265V mains input to low-voltage DC output suitable for powering LED strip lighting, modules and other constant voltage LED loads up to 100W total draw. The IP54 rating protects against dust ingress and water splashes, allowing the driver to be installed in damp locations including covered outdoor areas.

    Designed for recessed installation in false ceilings, wall cavities or under cabinetry where LED strip or module lighting is being retrofitted or installed new, the driver includes a mounting bracket with pre-drilled fixing points and a 1.5m output cable that terminates in a connector block. The 180-265V wide input range accommodates voltage fluctuations common in older buildings and allows the same unit to be used across different European supply voltages.

    The aluminium housing acts as a heat sink, dissipating heat generated during power conversion across the full length of the case. The black finish is a textured powder coat rather than gloss paint, which improves scratch resistance during installation and hides the unit when surface-mounted in exposed industrial or retail lighting schemes. The driver operates silently with no audible hum or buzz at full load.

    This is a non-dimmable constant voltage driver. If the installation requires dimming, a separate PWM controller or DALI/DMX control interface must be fitted between the driver output and the LED load. Pairing this driver with a dimmer switch on the mains input side will cause flicker or failure.

    Specification
    Wattage 100W
    IP Rating IP54
    Input Voltage AC 180-265V 50Hz
    Dimmable No
    Material Aluminium
    Finish Black
    Downloads

    Product manual

    Frequently Asked

    Can this driver be used outdoors?

    The IP54 rating protects against dust and water splashes, making it suitable for covered outdoor installations such as under eaves, in pergolas, or within weatherproof enclosures. It is not rated for direct exposure to rain or submersion.

    Is this driver dimmable?

    No. This is a non-dimmable constant voltage driver. Attempting to dim it using a mains dimmer switch will cause flicker or damage. If dimming is required, a separate PWM or 0-10V controller must be installed between the driver output and the LED load.

    What output voltage does it provide?

    The specification list shows input voltage but not output voltage. Contact Niori before purchasing if you need to confirm the output voltage (typically 12V DC or 24V DC for constant voltage LED drivers) matches your LED installation requirements.

    Where should it be installed?

    The driver is designed for recessed installation in ceilings, wall cavities, or under cabinetry where ventilation allows heat to dissipate. Allow at least 50mm clearance around the case for airflow. Do not bury the driver in insulation or enclose it in a sealed box.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.