Free Delivery on all orders over £99*

Alfa LED Recessed Downlight 10W 2700K - White

£3199
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Alfa 10W LED recessed downlight delivers 500 lumens of 2700K warm white light through a white aluminium trim. The integrated 10W LED sits behind a 60-degree beam angle reflector, casting focused downward light suitable for general room illumination or task lighting over kitchen worktops, bathroom vanities and hallway circulation routes.

Designed for recessed ceiling installation in dry interiors with a standard UK ceiling cavity depth, the downlight fits into a cutout approximately 75-80mm in diameter (exact cutout dimension depends on housing design). The spring-loaded mounting clips secure the fitting into plasterboard or solid ceilings without visible fixings from below. The white trim sits flush with the ceiling surface once installed, blending into white and light-coloured ceilings.

The 90 CRI rating reproduces colour accurately, making this downlight suitable for areas where colour rendering matters - kitchens where food is prepared, bathrooms where makeup is applied, or retail display zones. The aluminium construction and white powder-coat finish provide durability and heat dissipation for the 10W LED module. This downlight is not dimmable and carries an IP20 rating, limiting it to dry indoor use only.

Specification
Wattage 10W
Lumens 500lm
Colour Temperature 2700K
IP Rating IP20
Beam Angle 60°
CRI 90 CRI
Voltage 50Hz AC 220-240V
Dimmable No
Material Aluminium
Finish White
Energy Class F
Downloads
Frequently Asked

Is this downlight dimmable?

No. The integrated LED is not compatible with dimmer switches and must be wired to a standard on/off switch or lighting circuit only.

What cutout size is needed?

recessed downlights of this style typically require a 75-85mm diameter cutout. Check the technical specification sheet or contact us to confirm the exact cutout dimension for this model before cutting into the ceiling.

Can it be used in bathrooms?

Only in Zone 3 or outside the bathroom zones entirely. The IP20 rating means the downlight is not protected against moisture or water ingress, so it cannot be installed above baths, showers or within 600mm of a shower head.

What ceiling depth is required?

A minimum void depth of approximately 100-120mm above the ceiling surface is typically needed to accommodate the LED driver and heat sink assembly. Confirm the exact depth requirement before installation if ceiling cavity space is limited.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

Our Reviews

From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

Featured Projects

Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

Description

The Alfa 10W LED recessed downlight delivers 500 lumens of 2700K warm white light through a white aluminium trim. The integrated 10W LED sits behind a 60-degree beam angle reflector, casting focused downward light suitable for general room illumination or task lighting over kitchen worktops, bathroom vanities and hallway circulation routes.

Designed for recessed ceiling installation in dry interiors with a standard UK ceiling cavity depth, the downlight fits into a cutout approximately 75-80mm in diameter (exact cutout dimension depends on housing design). The spring-loaded mounting clips secure the fitting into plasterboard or solid ceilings without visible fixings from below. The white trim sits flush with the ceiling surface once installed, blending into white and light-coloured ceilings.

The 90 CRI rating reproduces colour accurately, making this downlight suitable for areas where colour rendering matters - kitchens where food is prepared, bathrooms where makeup is applied, or retail display zones. The aluminium construction and white powder-coat finish provide durability and heat dissipation for the 10W LED module. This downlight is not dimmable and carries an IP20 rating, limiting it to dry indoor use only.

Specification
Wattage 10W
Lumens 500lm
Colour Temperature 2700K
IP Rating IP20
Beam Angle 60°
CRI 90 CRI
Voltage 50Hz AC 220-240V
Dimmable No
Material Aluminium
Finish White
Energy Class F
Downloads
Frequently Asked

Is this downlight dimmable?

No. The integrated LED is not compatible with dimmer switches and must be wired to a standard on/off switch or lighting circuit only.

What cutout size is needed?

recessed downlights of this style typically require a 75-85mm diameter cutout. Check the technical specification sheet or contact us to confirm the exact cutout dimension for this model before cutting into the ceiling.

Can it be used in bathrooms?

Only in Zone 3 or outside the bathroom zones entirely. The IP20 rating means the downlight is not protected against moisture or water ingress, so it cannot be installed above baths, showers or within 600mm of a shower head.

What ceiling depth is required?

A minimum void depth of approximately 100-120mm above the ceiling surface is typically needed to accommodate the LED driver and heat sink assembly. Confirm the exact depth requirement before installation if ceiling cavity space is limited.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.