Taylor 3 Light Bathroom Wall Light - Polished Chrome IP44

The Taylor is a 533mm-wide bathroom wall light with three cylindrical opal etched glass shades mounted on a polished chrome bar frame. Each shade houses a 3W LED G9 bulb (included), providing a combined 9W output at 3000K warm white. The IP44 rating allows safe installation in bathroom zones 2 and 3, making it suitable for positioning above mirrors, beside vanity units, or on feature walls in wet rooms.

Designed for horizontal mounting above mirrors or washbasins, the Taylor provides diffused task lighting for grooming and washing without harsh shadows. The 142mm projection from the wall places the light heads forward of typical bathroom mirrors, while the 191mm fitting height allows clearance above standard mirror tops. The opal etched glass softens the LED light output, reducing glare when viewed directly at eye level during mirror use.

The polished chrome finish on the frame and mounting hardware gives a reflective metallic accent that pairs with chrome taps, towel rails and shower fittings in modern and contemporary bathrooms. The linear bar configuration distributes light evenly across a 500-600mm mirror width, making the Taylor suitable for single-basin and smaller double-basin vanity setups. The included LED bulbs are non-replaceable integrated units with an expected lifespan of 15,000-20,000 hours, equivalent to approximately 10-15 years of typical bathroom use.

What does the IP44 rating mean for bathroom installation?

IP44 means the fitting is protected against solid objects larger than 1mm and water splashes from any direction. It can be installed in bathroom zones 2 and 3 (outside the shower enclosure and bath area) but not directly in the shower cubicle itself or within 60cm of a bath edge.

Are the LED bulbs replaceable?

The three 3W LED G9 bulbs are included with the fitting. G9 bulbs are replaceable, but confirm with Quoizel whether this specific model uses integrated non-replaceable LEDs or standard replaceable G9 capsules before attempting replacement.

What mirror width does it suit?

The 533mm overall width provides even light distribution across mirrors approximately 500-600mm wide. For wider double-basin vanities, consider pairing two Taylor fittings or choosing a wider model from the same range.

How is it wired and mounted?

The fitting mounts to a standard UK back box with mains wiring terminated inside the wall. The chrome back plate covers the wiring connections and fixes to the wall with concealed screws. A qualified electrician should handle installation in bathroom zones to comply with Part P Building Regulations.