PowerMaster 6ft 65W LED Twin Batten - 4000K Cool White Screwless

The PowerMaster 6ft twin batten is a ceiling-mounted fluorescent replacement fitting housing two integrated LED tubes behind an opal polycarbonate diffuser, delivering 7,800lm at 4000K cool white from a combined 65W draw. The white powder-coated steel body measures 1800mm long and mounts to ceilings or joists via a screwless hinged bracket that clips open for access to the quick-fit push terminals inside.

Designed for offices, workshops, classrooms, garages and warehouses where high-output overhead lighting is needed across large floor areas, the twin-tube configuration provides broader light spread than single-tube battens of the same length. The 4000K colour temperature produces a neutral cool white output that supports concentration and task visibility without the yellow cast of warmer temperatures or the clinical harshness of 5000K+ daylight equivalents. The 120-degree beam angle gives uniform downward coverage without pronounced hotspots directly beneath the fitting.

The opal diffuser hides the LED tubes from direct view and softens the light output to reduce glare on screens and reflective work surfaces. The hinged bracket allows the diffuser cover to swing open without removing fixings, making LED tube replacement or cleaning straightforward on a stepladder. The steel housing is rated IP20 for dry indoor environments and IK06 for impact resistance against typical workshop knocks. At 130 lumens per watt, the fitting produces more light per watt than older T8 fluorescent twin battens while eliminating the warm-up delay and flicker associated with fluorescent ballasts.

Can this replace an old twin fluorescent batten?

Yes. The 1800mm length matches a standard 6ft twin fluorescent batten. Remove the old fitting, connect mains supply to the quick-fit push terminals, and fix the bracket to the ceiling. The integrated LED tubes do not require separate ballasts or starters.

Is the LED integrated or replaceable?

The LED tubes are integrated into the fitting. When they reach end of life (typically after many years of use given LED longevity), the entire batten would be replaced rather than swapping individual tubes.

What ceiling height does it suit?

Twin battens typically mount to ceilings 2.4m-4m high. Below 2.4m the fitting may feel visually dominant; above 4m the light may not provide enough task illumination at floor level depending on room size and activity.

Is it suitable for garages and workshops?

Yes, provided the space is dry and indoors. The IP20 rating protects against solid objects larger than 12.5mm but provides no moisture protection, so it cannot be used in damp or outdoor locations. The IK06 impact rating offers reasonable protection against workshop knocks.