Free Delivery on all orders over £99*

Fixing Kit for 24V CCT LED Flex - 5 Silicone Brackets & Screws

£199
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This fixing kit provides five translucent white silicone brackets and ten corrosion-resistant screws for mounting 24V CCT LED flex strips. Each bracket measures 30mm long by 5mm wide, designed to grip the width of standard LED flex without crushing or damaging the strip surface. The silicone construction flexes around uneven surfaces while maintaining a firm hold, and the IP68 rating matches typical outdoor-rated LED flex installations.

The kit suits installations where the LED flex needs to follow a wall line, ceiling perimeter, under-cabinet run, or outdoor architectural feature. Knightsbridge recommends spacing three brackets per metre of flex for consistent support and to prevent sagging between fixing points. The translucent white finish sits behind the LED strip itself, so it remains largely invisible once the flex is clipped into place.

The included screws are nickel-plated to resist corrosion in outdoor and high-humidity environments, making the kit suitable for bathroom perimeter lighting, outdoor patio runs, and garden architectural features where LED flex might be exposed to condensation or rain. The silicone brackets accommodate flex up to 5mm wide, covering most standard 24V CCT, RGB and RGBW flex strip profiles currently available.

Specification
Length 30mm
Width 5mm
Projection 6°
Construction Silicone
Finish White
Downloads

Product Specification Sheet

Frequently Asked

How many brackets are needed per metre of LED flex?

Knightsbridge recommends three brackets per metre for consistent support and to prevent sagging between fixing points. A 5m run of LED flex would therefore need approximately 15 brackets across three of these kits.

What LED flex widths does this kit fit?

The 5mm-wide bracket accommodates most standard 24V CCT, RGB and RGBW flex strips. Measure the width of your specific LED flex profile before ordering to confirm compatibility.

Can the brackets be used outdoors?

Yes. Both the silicone brackets and the nickel-plated screws carry an IP68 rating, making them suitable for outdoor installations where the LED flex itself is also rated IP68 for outdoor use.

What surfaces can the screws fix into?

The self-tapping screws suit timber, plasterboard, MDF and similar materials. For masonry, brick or tile surfaces, pre-drill a pilot hole and use a wall plug before inserting the screw.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This fixing kit provides five translucent white silicone brackets and ten corrosion-resistant screws for mounting 24V CCT LED flex strips. Each bracket measures 30mm long by 5mm wide, designed to grip the width of standard LED flex without crushing or damaging the strip surface. The silicone construction flexes around uneven surfaces while maintaining a firm hold, and the IP68 rating matches typical outdoor-rated LED flex installations.

    The kit suits installations where the LED flex needs to follow a wall line, ceiling perimeter, under-cabinet run, or outdoor architectural feature. Knightsbridge recommends spacing three brackets per metre of flex for consistent support and to prevent sagging between fixing points. The translucent white finish sits behind the LED strip itself, so it remains largely invisible once the flex is clipped into place.

    The included screws are nickel-plated to resist corrosion in outdoor and high-humidity environments, making the kit suitable for bathroom perimeter lighting, outdoor patio runs, and garden architectural features where LED flex might be exposed to condensation or rain. The silicone brackets accommodate flex up to 5mm wide, covering most standard 24V CCT, RGB and RGBW flex strip profiles currently available.

    Specification
    Length 30mm
    Width 5mm
    Projection 6°
    Construction Silicone
    Finish White
    Downloads

    Product Specification Sheet

    Frequently Asked

    How many brackets are needed per metre of LED flex?

    Knightsbridge recommends three brackets per metre for consistent support and to prevent sagging between fixing points. A 5m run of LED flex would therefore need approximately 15 brackets across three of these kits.

    What LED flex widths does this kit fit?

    The 5mm-wide bracket accommodates most standard 24V CCT, RGB and RGBW flex strips. Measure the width of your specific LED flex profile before ordering to confirm compatibility.

    Can the brackets be used outdoors?

    Yes. Both the silicone brackets and the nickel-plated screws carry an IP68 rating, making them suitable for outdoor installations where the LED flex itself is also rated IP68 for outdoor use.

    What surfaces can the screws fix into?

    The self-tapping screws suit timber, plasterboard, MDF and similar materials. For masonry, brick or tile surfaces, pre-drill a pilot hole and use a wall plug before inserting the screw.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.