Free Delivery on all orders over £99*

40W 24V Constant Voltage LED Driver IP67 - Knightsbridge

£2399
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge 24DCIP40 is a 40W constant voltage LED driver that converts 230V AC mains to a stable 24V DC output for low-voltage LED strip lighting, rope lights and architectural LED systems. The driver sits inside a sealed IP67-rated aluminium housing measuring 182mm x 58mm x 30mm, allowing installation in outdoor locations, bathrooms, wet rooms and areas exposed to rain or dust ingress.

Designed for residential outdoor garden lighting, pathway illumination, architectural facade lighting and commercial wet-location installations, the driver is pre-wired with 300mm mains input cable and 300mm low-voltage output cable. The constant voltage output maintains a steady 24V regardless of the load, making it compatible with parallel-wired LED strip runs where each section draws the same voltage. The Class I earth connection and SELV (Separated Extra-Low Voltage) output provide isolation between mains and load circuits.

The aluminium casing acts as a heat sink to dissipate thermal load, while internal overheat and overload protection circuits shut the driver down if the unit exceeds safe operating temperature or if the load exceeds the rated 40W capacity. The grey powder-coated finish resists UV degradation and corrosion in outdoor installations. The driver is non-dimmable and supplies a fixed 24V output whenever powered.

Specification
Length 182 mm
Height 30 mm
Width 58 mm
Construction Aluminium
Finish Grey
Class I
IP Rating IP67
Primary Voltage 230V 50Hz
Dimmable No
Driver Type Constant Voltage
Warranty 3
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What is the maximum LED load this driver can handle?

The driver is rated at 40W maximum output. At 24V DC, this equates to approximately 1.67A of current. Do not exceed this load — the internal overload protection will shut the driver down if the connected LED load draws more than the rated capacity.

Can this driver be used outdoors?

Yes. The IP67 rating means the driver is dust-tight and protected against immersion in water up to 1 metre depth for 30 minutes. This makes it suitable for outdoor garden lighting, pathway illumination, and installations exposed to rain or splashing.

Is this driver dimmable?

No. The 24DCIP40 is a non-dimmable constant voltage driver. It supplies a fixed 24V output whenever powered. If dimming is required, a separate mains-voltage dimmer placed before the driver may work with some loads, but compatibility is not guaranteed — contact us before attempting this configuration.

What is constant voltage vs constant current?

Constant voltage drivers like this one maintain a fixed voltage output (24V) regardless of the load, making them suitable for parallel-wired LED strip where each section needs the same voltage. Constant current drivers maintain a fixed current (measured in milliamps) and are typically used for single high-power LEDs or series-wired LED arrays.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 24DCIP40 is a 40W constant voltage LED driver that converts 230V AC mains to a stable 24V DC output for low-voltage LED strip lighting, rope lights and architectural LED systems. The driver sits inside a sealed IP67-rated aluminium housing measuring 182mm x 58mm x 30mm, allowing installation in outdoor locations, bathrooms, wet rooms and areas exposed to rain or dust ingress.

    Designed for residential outdoor garden lighting, pathway illumination, architectural facade lighting and commercial wet-location installations, the driver is pre-wired with 300mm mains input cable and 300mm low-voltage output cable. The constant voltage output maintains a steady 24V regardless of the load, making it compatible with parallel-wired LED strip runs where each section draws the same voltage. The Class I earth connection and SELV (Separated Extra-Low Voltage) output provide isolation between mains and load circuits.

    The aluminium casing acts as a heat sink to dissipate thermal load, while internal overheat and overload protection circuits shut the driver down if the unit exceeds safe operating temperature or if the load exceeds the rated 40W capacity. The grey powder-coated finish resists UV degradation and corrosion in outdoor installations. The driver is non-dimmable and supplies a fixed 24V output whenever powered.

    Specification
    Length 182 mm
    Height 30 mm
    Width 58 mm
    Construction Aluminium
    Finish Grey
    Class I
    IP Rating IP67
    Primary Voltage 230V 50Hz
    Dimmable No
    Driver Type Constant Voltage
    Warranty 3
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What is the maximum LED load this driver can handle?

    The driver is rated at 40W maximum output. At 24V DC, this equates to approximately 1.67A of current. Do not exceed this load — the internal overload protection will shut the driver down if the connected LED load draws more than the rated capacity.

    Can this driver be used outdoors?

    Yes. The IP67 rating means the driver is dust-tight and protected against immersion in water up to 1 metre depth for 30 minutes. This makes it suitable for outdoor garden lighting, pathway illumination, and installations exposed to rain or splashing.

    Is this driver dimmable?

    No. The 24DCIP40 is a non-dimmable constant voltage driver. It supplies a fixed 24V output whenever powered. If dimming is required, a separate mains-voltage dimmer placed before the driver may work with some loads, but compatibility is not guaranteed — contact us before attempting this configuration.

    What is constant voltage vs constant current?

    Constant voltage drivers like this one maintain a fixed voltage output (24V) regardless of the load, making them suitable for parallel-wired LED strip where each section needs the same voltage. Constant current drivers maintain a fixed current (measured in milliamps) and are typically used for single high-power LEDs or series-wired LED arrays.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.