Free Delivery on all orders over £99*

12V/24V LED Flex Connector CCT - 10mm White ABS IP20

£199
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge CONFLEX3P is a plug-and-play connector for 10mm CCT (colour temperature adjustable) LED flex strips operating on 12V or 24V DC power. The connector provides one male and one female end joined by a 400mm cable run, allowing two sections of CCT flex to be joined or a flex strip to be connected to a driver or controller without soldering.

Designed for indoor LED tape installations in residential, retail and hospitality environments, the connector suits applications where CCT flex needs to navigate corners, span gaps across furniture or cabinetry, or connect to remote drivers positioned away from the visible tape run. The 150mm cable tail on each end gives enough slack to route the connection behind plinths, inside coving or through cabinet backs without strain on the flex strip itself.

The connector housing is white ABS plastic with a push-fit clip mechanism that grips the copper contact pads on the flex strip. No tools or soldering are required — the flex strip slides into the connector channel and the clip locks it in place. The IP20 rating restricts use to dry indoor locations only; the connector is not sealed against moisture or dust ingress and must not be used in bathrooms, kitchens near sinks, or any outdoor application.

Specification
Length 355mm
Width 14mm
Projection 8°
Construction ABS
Finish White
Class III
IP Rating IP20
Primary Voltage 12/24V
Cable Length 0.4m
Downloads

Product Specification Sheet

Frequently Asked

What width LED flex does this connector fit?

The connector is designed for 10mm-wide CCT LED flex strips. It will not fit 8mm or 12mm flex without modification, and modification is not recommended as it compromises the connection reliability.

Can this connector be used outdoors?

No. The IP20 rating means the connector has no protection against moisture or dust. It must only be used in dry indoor environments away from direct water contact, high humidity or condensation.

Does the connector work with single-colour LED flex?

This connector is specifically for CCT (colour temperature adjustable) flex, which typically has four or five contact points. Single-colour flex uses a different contact configuration and requires a different connector type.

Is soldering required?

No. The connector uses a push-fit clip mechanism. The LED flex strip slides into the connector channel and the clip locks it onto the copper contact pads. No tools or soldering are needed for installation.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge CONFLEX3P is a plug-and-play connector for 10mm CCT (colour temperature adjustable) LED flex strips operating on 12V or 24V DC power. The connector provides one male and one female end joined by a 400mm cable run, allowing two sections of CCT flex to be joined or a flex strip to be connected to a driver or controller without soldering.

    Designed for indoor LED tape installations in residential, retail and hospitality environments, the connector suits applications where CCT flex needs to navigate corners, span gaps across furniture or cabinetry, or connect to remote drivers positioned away from the visible tape run. The 150mm cable tail on each end gives enough slack to route the connection behind plinths, inside coving or through cabinet backs without strain on the flex strip itself.

    The connector housing is white ABS plastic with a push-fit clip mechanism that grips the copper contact pads on the flex strip. No tools or soldering are required — the flex strip slides into the connector channel and the clip locks it in place. The IP20 rating restricts use to dry indoor locations only; the connector is not sealed against moisture or dust ingress and must not be used in bathrooms, kitchens near sinks, or any outdoor application.

    Specification
    Length 355mm
    Width 14mm
    Projection 8°
    Construction ABS
    Finish White
    Class III
    IP Rating IP20
    Primary Voltage 12/24V
    Cable Length 0.4m
    Downloads

    Product Specification Sheet

    Frequently Asked

    What width LED flex does this connector fit?

    The connector is designed for 10mm-wide CCT LED flex strips. It will not fit 8mm or 12mm flex without modification, and modification is not recommended as it compromises the connection reliability.

    Can this connector be used outdoors?

    No. The IP20 rating means the connector has no protection against moisture or dust. It must only be used in dry indoor environments away from direct water contact, high humidity or condensation.

    Does the connector work with single-colour LED flex?

    This connector is specifically for CCT (colour temperature adjustable) flex, which typically has four or five contact points. Single-colour flex uses a different contact configuration and requires a different connector type.

    Is soldering required?

    No. The connector uses a push-fit clip mechanism. The LED flex strip slides into the connector channel and the clip locks it onto the copper contact pads. No tools or soldering are needed for installation.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.