Free Delivery on all orders over £99*

Mini PIR Sensor 360° Recess Mount - White with Power Module

£2699
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge Mini PIR Sensor is a 52mm diameter 360° ceiling-mounted occupancy detector with a separate power module, designed for recessed installation in 38mm ceiling cut-outs. The sensor detects movement within an 8m radius and switches connected lighting on or off based on occupancy, with adjustable lux thresholds and time delays from 30 seconds to 30 minutes.

Designed for residential hallways, landings, bathrooms, utility rooms and commercial corridors where automatic lighting control reduces energy use and improves convenience. The separate power module mounts in the ceiling void and connects to the sensor head via a short cable, simplifying installation in shallow ceiling voids where depth is limited. The 55mm recessed depth from the ceiling surface keeps the sensor flush with the ceiling plane.

The sensor head is made from white polycarbonate and sits nearly flush with the ceiling once installed, with only the PIR lens visible from below. The adjustable lux setting prevents the sensor from switching lights on during daylight when ambient light is sufficient, and the adjustable timer sets how long the lights remain on after the last detected movement. The sensor handles up to 2000W incandescent or 200W LED load and can be wired in parallel with multiple sensors to control the same lighting circuit from different detection zones.

Specification
Diameter 52 mm
Recessed Depth 55 mm
Cut-out Diameter 38 mm
Construction Polycarbonate
Finish White
Class II
IP Rating IP20
Primary Voltage 230V 50Hz
Warranty 1
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What ceiling void depth is needed?

The sensor head requires a 55mm recessed depth below the ceiling surface, and the separate power module adds approximately another 30-40mm above that. A total ceiling void depth of 100mm or more is recommended for comfortable installation.

Can it be used in bathrooms?

The sensor is IP20 rated for dry indoor environments only. It is not suitable for bathroom zones where water spray or high humidity may occur. For bathroom PIR control, look for sensors with IP44 or IP65 ratings.

How is the lux threshold adjusted?

The lux threshold is adjusted via a dial on the sensor head or power module (refer to the manual for your specific model). Set it lower to allow the sensor to trigger in brighter ambient light, or higher to prevent triggering during daylight.

Can multiple sensors control the same circuit?

Yes. The sensor can be wired in parallel with other compatible PIR sensors to control the same lighting circuit from multiple detection zones, useful for L-shaped hallways or corridors with corners.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge Mini PIR Sensor is a 52mm diameter 360° ceiling-mounted occupancy detector with a separate power module, designed for recessed installation in 38mm ceiling cut-outs. The sensor detects movement within an 8m radius and switches connected lighting on or off based on occupancy, with adjustable lux thresholds and time delays from 30 seconds to 30 minutes.

    Designed for residential hallways, landings, bathrooms, utility rooms and commercial corridors where automatic lighting control reduces energy use and improves convenience. The separate power module mounts in the ceiling void and connects to the sensor head via a short cable, simplifying installation in shallow ceiling voids where depth is limited. The 55mm recessed depth from the ceiling surface keeps the sensor flush with the ceiling plane.

    The sensor head is made from white polycarbonate and sits nearly flush with the ceiling once installed, with only the PIR lens visible from below. The adjustable lux setting prevents the sensor from switching lights on during daylight when ambient light is sufficient, and the adjustable timer sets how long the lights remain on after the last detected movement. The sensor handles up to 2000W incandescent or 200W LED load and can be wired in parallel with multiple sensors to control the same lighting circuit from different detection zones.

    Specification
    Diameter 52 mm
    Recessed Depth 55 mm
    Cut-out Diameter 38 mm
    Construction Polycarbonate
    Finish White
    Class II
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Warranty 1
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What ceiling void depth is needed?

    The sensor head requires a 55mm recessed depth below the ceiling surface, and the separate power module adds approximately another 30-40mm above that. A total ceiling void depth of 100mm or more is recommended for comfortable installation.

    Can it be used in bathrooms?

    The sensor is IP20 rated for dry indoor environments only. It is not suitable for bathroom zones where water spray or high humidity may occur. For bathroom PIR control, look for sensors with IP44 or IP65 ratings.

    How is the lux threshold adjusted?

    The lux threshold is adjusted via a dial on the sensor head or power module (refer to the manual for your specific model). Set it lower to allow the sensor to trigger in brighter ambient light, or higher to prevent triggering during daylight.

    Can multiple sensors control the same circuit?

    Yes. The sensor can be wired in parallel with other compatible PIR sensors to control the same lighting circuit from multiple detection zones, useful for L-shaped hallways or corridors with corners.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.