Knightsbridge 100W LED Floodlight - 6000K IP65 Anthracite

The Knightsbridge FLPA100D is a 100W LED floodlight delivering 10,145 lumens at 6000K daylight white through a 105-degree beam angle. The integrated SMD LED array sits behind a clear polycarbonate lens within a die-cast aluminium housing finished in anthracite grey, with an IP65 rating protecting against dust ingress and low-pressure water jets from any direction.

Designed for commercial, retail and domestic security and area lighting, the floodlight mounts to walls, soffit boards or ground spikes using the adjustable rear bracket. The 105-degree beam provides wide coverage suited to driveways, building perimeters, loading bays, car parks and rear gardens where bright illumination is needed after dark. An internal terminal block on the rear housing accepts direct mains wiring and the unit is compatible with external LED-rated PIR sensors when sensor control is required.

The die-cast aluminium construction dissipates heat from the 100W LED array, contributing to the rated L70B50 lifespan of 54,000 hours (approximately 15 years at 10 hours daily use). The 6000K colour temperature produces a crisp daylight-white light that renders colours accurately (CRI >80) and pairs with CCTV systems requiring clear footage. The floodlight measures 300mm wide by 205mm high with a 170mm projection from the wall when bracket-mounted, weighing enough to resist wind movement once secured.

Product Specification Sheet

Can this floodlight be used with a PIR sensor?

Yes. The floodlight is compatible with external LED-rated PIR motion sensors. The internal terminal block on the rear housing accepts direct wiring from a sensor, allowing automatic on/off control when movement is detected.

What does the IP65 rating mean?

IP65 means the floodlight is fully dust-tight and protected against low-pressure water jets from any direction. It can be mounted outdoors in exposed positions including walls, soffits and ground spikes, and will withstand rain, snow and garden hose spray.

How bright is 10,145 lumens?

10,145 lumens is approximately equivalent to a 500W halogen floodlight. This output suits large driveways, car parks, building perimeters and loading bays where wide-area security lighting is needed. The 105-degree beam angle spreads the light across a broad area rather than concentrating it into a narrow spot.

What is the difference between 6000K and 4000K floodlights?

6000K produces a crisp daylight-white light with a slight blue tone, often preferred for security and CCTV applications because it renders colours accurately and provides high contrast. 4000K is a neutral white that appears warmer and is typically used for architectural and garden lighting where a softer appearance is preferred.