Free Delivery on all orders over £99*

F-Type SAT TV Outlet Non-Isolated - Matt Black Rounded Edge

£699
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge CL015MB is a single F-type SAT TV outlet in a non-isolated configuration, designed for satellite installations that require two-way communication between the dish and the receiver. The outlet is housed in a rounded edge matt black faceplate made from 304 stainless steel, with a built-in gasket that sits flush against the wall once fitted.

Non-isolated outlets allow signal pass-through in both directions, making them suitable for Sky Q installations, communal satellite systems, and other setups where the receiver needs to send control signals back to the LNB or distribution equipment. The outlet fits a standard 25mm minimum back box depth and projects 15.2mm from the wall once installed. The rounded edge design softens the profile against painted or papered walls.

The matt black finish on the 304 stainless steel plate provides corrosion resistance and a low-reflectance surface that integrates cleanly with contemporary, industrial and minimalist interiors. The plate is IP20 rated for standard indoor dry locations and carries a 25-year manufacturer guarantee. The F-type connector accepts standard satellite coaxial cables terminated with F-type plugs.

Specification
Height 85.75mm
Width 85.75mm
Depth 27.05mm
Projection 15.2mm
Min. Mounting Box Depth 25mmmm
Plate Depth 7.5mm
Construction 304 Stainless steel
Finish Matt Black
IP Rating IP20
Warranty 25 Year Guarantee
Downloads

Product Specification Sheet

Frequently Asked

What is the difference between non-isolated and isolated SAT outlets?

Non-isolated outlets allow two-way signal communication between the receiver and the satellite dish or distribution equipment, which is required for Sky Q and some communal systems. Isolated outlets block return signals and are used in simpler one-way satellite setups where the receiver only needs to receive broadcast signals.

What back box depth is required?

A minimum 25mm back box depth is needed for safe installation. The outlet projects 15.2mm from the wall once fitted.

Is the rounded edge plate screwed to the wall?

Yes. The rounded edge design uses visible fixing screws. The built-in gasket sits between the plate and the wall surface to create a clean seal against painted or papered finishes.

Can this be used in bathrooms?

The outlet is IP20 rated, which means it is suitable for standard indoor dry locations only. It is not rated for use in bathrooms, kitchens or other areas where moisture or water ingress is a risk.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge CL015MB is a single F-type SAT TV outlet in a non-isolated configuration, designed for satellite installations that require two-way communication between the dish and the receiver. The outlet is housed in a rounded edge matt black faceplate made from 304 stainless steel, with a built-in gasket that sits flush against the wall once fitted.

    Non-isolated outlets allow signal pass-through in both directions, making them suitable for Sky Q installations, communal satellite systems, and other setups where the receiver needs to send control signals back to the LNB or distribution equipment. The outlet fits a standard 25mm minimum back box depth and projects 15.2mm from the wall once installed. The rounded edge design softens the profile against painted or papered walls.

    The matt black finish on the 304 stainless steel plate provides corrosion resistance and a low-reflectance surface that integrates cleanly with contemporary, industrial and minimalist interiors. The plate is IP20 rated for standard indoor dry locations and carries a 25-year manufacturer guarantee. The F-type connector accepts standard satellite coaxial cables terminated with F-type plugs.

    Specification
    Height 85.75mm
    Width 85.75mm
    Depth 27.05mm
    Projection 15.2mm
    Min. Mounting Box Depth 25mmmm
    Plate Depth 7.5mm
    Construction 304 Stainless steel
    Finish Matt Black
    IP Rating IP20
    Warranty 25 Year Guarantee
    Downloads

    Product Specification Sheet

    Frequently Asked

    What is the difference between non-isolated and isolated SAT outlets?

    Non-isolated outlets allow two-way signal communication between the receiver and the satellite dish or distribution equipment, which is required for Sky Q and some communal systems. Isolated outlets block return signals and are used in simpler one-way satellite setups where the receiver only needs to receive broadcast signals.

    What back box depth is required?

    A minimum 25mm back box depth is needed for safe installation. The outlet projects 15.2mm from the wall once fitted.

    Is the rounded edge plate screwed to the wall?

    Yes. The rounded edge design uses visible fixing screws. The built-in gasket sits between the plate and the wall surface to create a clean seal against painted or papered finishes.

    Can this be used in bathrooms?

    The outlet is IP20 rated, which means it is suitable for standard indoor dry locations only. It is not rated for use in bathrooms, kitchens or other areas where moisture or water ingress is a risk.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.