Free Delivery on all orders over £99*

45A Cooker Connection Unit - White Square Edge

£499
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available

Minimum order for this item is 5.

Description

The Knightsbridge 45A cooker connection unit provides a dedicated high-current connection point for electric cookers, ovens and hobs, rated to BS 5733 for safe switching and isolation of 45A loads on 230V circuits. The white square edge faceplate is moulded from thermoset resin with anti-microbial properties tested to ISO 22196:2011, inhibiting bacterial growth on the surface.

Designed for kitchen and utility room installation behind or adjacent to the cooker position, the unit allows the appliance to be safely isolated without needing to switch off the entire circuit at the consumer unit. The concealed fixing design hides mounting screws behind removable screw cap covers once installed. The terminal block inside accepts large-gauge cable with clamp fittings, and a bottom knockout allows the outgoing cable to drop down to the cooker position below.

The 86mm x 86mm faceplate sits flush on a standard UK single-gang back box with a minimum 35mm depth, projecting 23mm from the wall once fitted. The square edge profile gives a clean, defined perimeter where the faceplate meets the wall, suiting modern and contemporary kitchen finishes. The IP20 rating makes this suitable for dry indoor locations only — not for outdoor or wet-room use.

Specification
Height 86 mm
Width 86 mm
Projection 23 mm
Min. Mounting Box Depth 35mm
Construction Thermoset resin
Finish White
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Anti-Microbial Properties 3rd Party Tested to ISO 22196:2011
Warranty 25
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What appliances can this connection unit supply?

This 45A unit is designed for electric cookers, ovens, and hobs drawing up to 10.35kW on a 230V circuit. It must be installed on a dedicated cooker circuit with appropriate cable sizing and circuit protection — consult a qualified electrician before installation.

What back box depth is required?

A minimum 35mm back box depth is needed. Standard UK single-gang metal back boxes of 35mm or 47mm depth are both suitable.

What does the anti-microbial property do?

The thermoset resin faceplate is treated with an anti-microbial additive tested to ISO 22196:2011, which inhibits bacterial growth on the surface. This is particularly useful in kitchen environments where the switch may be touched with food residue on hands.

Can the screw heads be hidden?

Yes. The unit includes screw cap covers that clip over the fixing screws once the faceplate is mounted, giving a concealed-fixing appearance from the front.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 45A cooker connection unit provides a dedicated high-current connection point for electric cookers, ovens and hobs, rated to BS 5733 for safe switching and isolation of 45A loads on 230V circuits. The white square edge faceplate is moulded from thermoset resin with anti-microbial properties tested to ISO 22196:2011, inhibiting bacterial growth on the surface.

    Designed for kitchen and utility room installation behind or adjacent to the cooker position, the unit allows the appliance to be safely isolated without needing to switch off the entire circuit at the consumer unit. The concealed fixing design hides mounting screws behind removable screw cap covers once installed. The terminal block inside accepts large-gauge cable with clamp fittings, and a bottom knockout allows the outgoing cable to drop down to the cooker position below.

    The 86mm x 86mm faceplate sits flush on a standard UK single-gang back box with a minimum 35mm depth, projecting 23mm from the wall once fitted. The square edge profile gives a clean, defined perimeter where the faceplate meets the wall, suiting modern and contemporary kitchen finishes. The IP20 rating makes this suitable for dry indoor locations only — not for outdoor or wet-room use.

    Specification
    Height 86 mm
    Width 86 mm
    Projection 23 mm
    Min. Mounting Box Depth 35mm
    Construction Thermoset resin
    Finish White
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Anti-Microbial Properties 3rd Party Tested to ISO 22196:2011
    Warranty 25
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What appliances can this connection unit supply?

    This 45A unit is designed for electric cookers, ovens, and hobs drawing up to 10.35kW on a 230V circuit. It must be installed on a dedicated cooker circuit with appropriate cable sizing and circuit protection — consult a qualified electrician before installation.

    What back box depth is required?

    A minimum 35mm back box depth is needed. Standard UK single-gang metal back boxes of 35mm or 47mm depth are both suitable.

    What does the anti-microbial property do?

    The thermoset resin faceplate is treated with an anti-microbial additive tested to ISO 22196:2011, which inhibits bacterial growth on the surface. This is particularly useful in kitchen environments where the switch may be touched with food residue on hands.

    Can the screw heads be hidden?

    Yes. The unit includes screw cap covers that clip over the fixing screws once the faceplate is mounted, giving a concealed-fixing appearance from the front.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.