Free Delivery on all orders over £99*

24V RGB LED Strip Light IP67 - 30m Roll

£31799
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge LFC24IPRGB is a 24V RGB LED strip light supplied on a 30m roll, with 36 x 5050 SMD LEDs per metre sealed under IP67-rated silicone sheathing. The strip draws 9W per metre and requires a 24V constant voltage driver plus an RGB controller and remote (sold separately) to change colours and control output.

Designed for installation in wet or damp environments where IP20 or IP44 strip would fail, the IP67 rating allows the strip to be installed outdoors under canopies, in bathrooms (outside zones 0-1), beneath kitchen cabinets near splashback areas, in commercial bar or restaurant settings, and in architectural lighting schemes where moisture ingress is a risk. The silicone coating seals the LEDs and PCB against water jets from any direction, though the strip should not be permanently submerged.

The 12.25mm width (15.5mm with end caps fitted) makes the strip narrow enough to fit into most aluminium extrusion profiles, and the 3M self-adhesive backing allows direct surface mounting onto clean, dry surfaces. Each 166mm cutting section contains multiple LEDs, so the strip can be shortened to the exact length needed without sacrificing brightness uniformity. The 24V architecture allows runs of up to 10m from a single driver connection point without noticeable voltage drop or colour shift along the length.

RGB mode cycles through red, green, blue and mixed colours using a compatible controller. The strip accepts cutting service orders where Niori cuts the roll to a specified shorter length before dispatch, reducing installation waste on projects where a full 30m roll is not needed.

Specification
Length 30000 mm
Width 12.2 mm
Projection 8.5 mm
Class III
IP Rating IP67
Primary Voltage 24V DC
Lamp Technology LED
Lamp Included Yes
Dimmable Driver dependent
Light Colour RGB
Wattage 9
Warranty 3
Downloads

Product Specification Sheet

Frequently Asked

What driver and controller are needed?

This strip requires a 24V DC constant voltage driver rated for at least 270W (30m x 9W per metre) if running the full roll, plus an RGB controller and remote to change colours. These are sold separately. Contact us for compatible driver and controller recommendations.

Can the strip be cut to length?

Yes. The strip can be cut every 166mm along marked cutting points without damaging the circuit. Niori also offers a cutting service where the strip is cut to a specified length before dispatch.

What does IP67 mean in practice?

IP67 means the strip is sealed against dust ingress and can withstand water jets from any direction. It can be installed outdoors under cover, in bathrooms outside zones 0-1, and in other damp environments, but should not be permanently submerged.

What is the maximum run length from one connection?

The maximum recommended run is 10m from a single driver connection point. Longer runs should be wired with power injected at multiple points along the strip to avoid voltage drop and colour shift.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Refunds are made in line with our returns policy, which has the full details.

To arrange a return, call us on 020 8149 5199 or use our contact page.

Recommended For You

    Sophisticated Style

    Timeless Design, Effortless Elegance

    Discover lighting that blends refined design with approachable luxury. Each piece showcases thoughtful detailing and timeless character, creating a lasting impression in any space.

    Craftsmanship

    Crafted With Care & Quality

    Each piece is thoughtfully built with expert precision and refined finishes, celebrating the art of craftsmanship while ensuring every detail meets the highest standards of quality.

    Performance

    Innovative Illumination

    Our lighting incorporates advanced technology to deliver exceptional brightness and energy efficiency, offering both function and style for contemporary living.

    Effortless Upkeep

    Lighting That Lasts

    Designed for long-term reliability, our fixtures resist wear and maintain their brilliance over time, providing consistent illumination with minimal maintenance.

    Confidence

    Warranty You Can Trust

    Our collection is backed by warranties ranging from 1 to 5 years, giving you lasting peace of mind and assurance in the quality and reliability of every product.

    Luxury Delivered

    Free Worldwide Shipping

    Enjoy complimentary, secure delivery anywhere in the world on orders over £99, simply order and we’ll handle the rest.

    You Might Also Like

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge LFC24IPRGB is a 24V RGB LED strip light supplied on a 30m roll, with 36 x 5050 SMD LEDs per metre sealed under IP67-rated silicone sheathing. The strip draws 9W per metre and requires a 24V constant voltage driver plus an RGB controller and remote (sold separately) to change colours and control output.

    Designed for installation in wet or damp environments where IP20 or IP44 strip would fail, the IP67 rating allows the strip to be installed outdoors under canopies, in bathrooms (outside zones 0-1), beneath kitchen cabinets near splashback areas, in commercial bar or restaurant settings, and in architectural lighting schemes where moisture ingress is a risk. The silicone coating seals the LEDs and PCB against water jets from any direction, though the strip should not be permanently submerged.

    The 12.25mm width (15.5mm with end caps fitted) makes the strip narrow enough to fit into most aluminium extrusion profiles, and the 3M self-adhesive backing allows direct surface mounting onto clean, dry surfaces. Each 166mm cutting section contains multiple LEDs, so the strip can be shortened to the exact length needed without sacrificing brightness uniformity. The 24V architecture allows runs of up to 10m from a single driver connection point without noticeable voltage drop or colour shift along the length.

    RGB mode cycles through red, green, blue and mixed colours using a compatible controller. The strip accepts cutting service orders where Niori cuts the roll to a specified shorter length before dispatch, reducing installation waste on projects where a full 30m roll is not needed.

    Specification
    Length 30000 mm
    Width 12.2 mm
    Projection 8.5 mm
    Class III
    IP Rating IP67
    Primary Voltage 24V DC
    Lamp Technology LED
    Lamp Included Yes
    Dimmable Driver dependent
    Light Colour RGB
    Wattage 9
    Warranty 3
    Downloads

    Product Specification Sheet

    Frequently Asked

    What driver and controller are needed?

    This strip requires a 24V DC constant voltage driver rated for at least 270W (30m x 9W per metre) if running the full roll, plus an RGB controller and remote to change colours. These are sold separately. Contact us for compatible driver and controller recommendations.

    Can the strip be cut to length?

    Yes. The strip can be cut every 166mm along marked cutting points without damaging the circuit. Niori also offers a cutting service where the strip is cut to a specified length before dispatch.

    What does IP67 mean in practice?

    IP67 means the strip is sealed against dust ingress and can withstand water jets from any direction. It can be installed outdoors under cover, in bathrooms outside zones 0-1, and in other damp environments, but should not be permanently submerged.

    What is the maximum run length from one connection?

    The maximum recommended run is 10m from a single driver connection point. Longer runs should be wired with power injected at multiple points along the strip to avoid voltage drop and colour shift.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Refunds are made in line with our returns policy, which has the full details.

    To arrange a return, call us on 020 8149 5199 or use our contact page.