Free Delivery on all orders over £99*

12V LED Flex Strip 5m Red - 60 LEDs/m IP20

£1199
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge 12V LED flex strip delivers 5 metres of red accent lighting via 60 surface-mounted 2835 SMD LEDs per metre, running at 4.8W per metre on 12V DC constant voltage. The 8mm-wide strip carries a self-adhesive 3M backing along its full length, allowing it to be pressed onto clean, dry surfaces without additional fixings. The strip can be cut at marked 50mm intervals to fit exact run lengths without wasting unused sections.

Designed for indoor accent and feature lighting rated IP20, the strip suits under-shelf lighting, cove lighting, display case illumination, bar fascias, and architectural detail highlighting where red colour is needed. The strip requires a separate 12V DC LED driver sized to the total wattage of the installed run—5m at 4.8W/m draws 24W, so a 30W driver provides headroom. The red output works for retail display, hospitality mood lighting, and residential accent zones where colour draws attention to specific surfaces or objects.

The Class III rating means the strip operates at extra-low voltage (12V DC), removing the shock hazard present in mains-voltage LED tape. When paired with a dimmable LED driver and compatible dimmer module, the strip dims smoothly from full output to near-zero without flicker. The 2835 SMD chip spacing at 60 LEDs per metre gives even light distribution along the run without visible individual LED spotting when the strip is concealed behind a lip or diffuser channel. The 0.15m lead cable at one end terminates in bare wire or connector (depending on batch) ready to be joined to the driver output.

Specification
Length 5015mm
Width 8mm
Projection 2°
Class III
IP Rating IP20
Primary Voltage 12V DC
Cable Length 0.15m
Wattage 4.8W
Lamp Included Yes
Light Colour Red
Downloads

Product Specification Sheet

Frequently Asked

What LED driver is needed?

The 5m strip draws 24W total at 4.8W per metre. Use a 12V DC constant voltage LED driver rated at 30W or higher to provide headroom. If you cut the strip shorter, calculate the wattage needed (length in metres × 4.8W) and size the driver accordingly.

Can the strip be cut to length?

Yes. The strip has cut marks every 50mm along its length. Cut only at these marked intervals using sharp scissors or a craft knife to avoid damaging the circuitry. Cutting between marks breaks the circuit and the cut section will not light.

Is it dimmable?

Yes, when paired with a dimmable 12V DC LED driver and a compatible dimmer module or controller. The strip itself has no dimming circuitry—dimming is controlled by the driver or an inline PWM dimmer on the 12V circuit.

Can it be used outdoors or in bathrooms?

No. The IP20 rating means the strip is not protected against moisture ingress and is only suitable for dry indoor locations. For bathrooms or outdoor use, you need an IP65 or IP67 rated version with silicone coating or sleeve protection.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

Recommended For You

    Sophisticated Style

    Timeless Design, Effortless Elegance

    Discover lighting that blends refined design with approachable luxury. Each piece showcases thoughtful detailing and timeless character, creating a lasting impression in any space.

    Craftsmanship

    Crafted With Care & Quality

    Each piece is thoughtfully built with expert precision and refined finishes, celebrating the art of craftsmanship while ensuring every detail meets the highest standards of quality.

    Performance

    Innovative Illumination

    Our lighting incorporates advanced technology to deliver exceptional brightness and energy efficiency, offering both function and style for contemporary living.

    Effortless Upkeep

    Lighting That Lasts

    Designed for long-term reliability, our fixtures resist wear and maintain their brilliance over time, providing consistent illumination with minimal maintenance.

    Confidence

    Warranty You Can Trust

    Our collection is backed by warranties ranging from 1 to 5 years, giving you lasting peace of mind and assurance in the quality and reliability of every product.

    Luxury Delivered

    Free Worldwide Shipping

    Enjoy complimentary, secure delivery anywhere in the world on orders over £99, simply order and we’ll handle the rest.

    You Might Also Like

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 12V LED flex strip delivers 5 metres of red accent lighting via 60 surface-mounted 2835 SMD LEDs per metre, running at 4.8W per metre on 12V DC constant voltage. The 8mm-wide strip carries a self-adhesive 3M backing along its full length, allowing it to be pressed onto clean, dry surfaces without additional fixings. The strip can be cut at marked 50mm intervals to fit exact run lengths without wasting unused sections.

    Designed for indoor accent and feature lighting rated IP20, the strip suits under-shelf lighting, cove lighting, display case illumination, bar fascias, and architectural detail highlighting where red colour is needed. The strip requires a separate 12V DC LED driver sized to the total wattage of the installed run—5m at 4.8W/m draws 24W, so a 30W driver provides headroom. The red output works for retail display, hospitality mood lighting, and residential accent zones where colour draws attention to specific surfaces or objects.

    The Class III rating means the strip operates at extra-low voltage (12V DC), removing the shock hazard present in mains-voltage LED tape. When paired with a dimmable LED driver and compatible dimmer module, the strip dims smoothly from full output to near-zero without flicker. The 2835 SMD chip spacing at 60 LEDs per metre gives even light distribution along the run without visible individual LED spotting when the strip is concealed behind a lip or diffuser channel. The 0.15m lead cable at one end terminates in bare wire or connector (depending on batch) ready to be joined to the driver output.

    Specification
    Length 5015mm
    Width 8mm
    Projection 2°
    Class III
    IP Rating IP20
    Primary Voltage 12V DC
    Cable Length 0.15m
    Wattage 4.8W
    Lamp Included Yes
    Light Colour Red
    Downloads

    Product Specification Sheet

    Frequently Asked

    What LED driver is needed?

    The 5m strip draws 24W total at 4.8W per metre. Use a 12V DC constant voltage LED driver rated at 30W or higher to provide headroom. If you cut the strip shorter, calculate the wattage needed (length in metres × 4.8W) and size the driver accordingly.

    Can the strip be cut to length?

    Yes. The strip has cut marks every 50mm along its length. Cut only at these marked intervals using sharp scissors or a craft knife to avoid damaging the circuitry. Cutting between marks breaks the circuit and the cut section will not light.

    Is it dimmable?

    Yes, when paired with a dimmable 12V DC LED driver and a compatible dimmer module or controller. The strip itself has no dimming circuitry—dimming is controlled by the driver or an inline PWM dimmer on the 12V circuit.

    Can it be used outdoors or in bathrooms?

    No. The IP20 rating means the strip is not protected against moisture ingress and is only suitable for dry indoor locations. For bathrooms or outdoor use, you need an IP65 or IP67 rated version with silicone coating or sleeve protection.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.