Knightsbridge 200W LED Floodlight - 6000K Daylight IP65

The Knightsbridge FLPA200D is a 200W LED floodlight delivering 19,980 lumens at 6000K daylight white through a high-output SMD LED array mounted behind a clear polycarbonate diffuser. The die-cast aluminium housing carries an IP65 rating, making it suitable for permanent outdoor installation in commercial, retail and domestic environments where high-level security or work lighting is needed.

Designed for wall mounting on building facades, gable ends, warehouse exteriors and perimeter walls, the floodlight's 105-degree beam angle provides wide area coverage without the narrow hot-spot typical of older halogen floods. The rear-mounted terminal block accepts direct mains wiring and is compatible with LED-rated external PIR sensors, allowing the floodlight to be triggered by motion detection rather than running continuously. At 200W draw the unit delivers approximately 100 lumens per watt, significantly more efficient than equivalent halogen alternatives.

The anthracite grey powder-coated finish resists UV degradation and coastal corrosion better than painted mild steel housings. The Class I electrical safety classification requires an earth connection during installation. Projected lifespan at L70B50 is 54,000 hours, equivalent to approximately six years of continuous operation or fifteen years at typical security-lighting duty cycles. The floodlight measures 360mm wide by 237mm high with a 200mm projection from the wall once the rear bracket is fitted.

Product Specification Sheet

Can this be used with a PIR sensor?

Yes. The rear terminal block is compatible with LED-rated external PIR sensors, allowing the floodlight to be triggered by motion detection. Make sure the sensor is rated for LED loads rather than older halogen-specific sensors.

What does the IP65 rating mean?

IP65 means the housing is dust-tight and protected against water jets from any direction. This makes the floodlight suitable for permanent outdoor installation in exposed positions, including coastal and high-rainfall areas.

How does 6000K compare to warm white?

6000K is daylight white with a cool, bluish tone that provides high colour clarity and is typical for security and commercial work lighting. Warm white (2700K-3000K) has a yellowish tone and is more common in residential decorative lighting. The 6000K output from this floodlight closely matches natural daylight.

What lifespan can I expect?

The L70B50 rating of 54,000 hours means the LED array will maintain at least 70% of its initial light output after 54,000 hours of continuous operation. At typical security-lighting duty cycles (4-6 hours per night) this translates to approximately fifteen years of service before noticeable dimming.