Flame 2 Light Outdoor Wall Light - Black

The Flame is a black outdoor wall light with two GU10 fittings arranged for bi-directional illumination, casting light both upwards and downwards from a single cylindrical body. The vertical ribbed exterior is formed from powder-coated metal with a matt black finish, and the fitting mounts to external walls via a matching black rectangular backplate. The IP44 rating means the fitting is protected against solid objects over 1mm and water splashes from any direction.

Designed for external use on house facades, patios, covered entrances and garage walls, the Flame provides both functional illumination and decorative accent. The up-down light pattern creates wash effects on the wall surface above and below the fitting, highlighting texture on rendered, brick or cladding finishes. The compact 65mm width and 180mm projection keep the fitting close to the wall, avoiding intrusion into narrow walkways or doorways. The dual GU10 sockets accept standard LED or halogen bulbs (sold separately), allowing control over light temperature and brightness.

The ribbed cylindrical form gives the fitting architectural definition without ornament, pairing cleanly with modern, industrial and contemporary building styles. The matt black finish absorbs rather than reflects daylight, keeping the fitting visually recessive until lit. The metal construction and IP44 rating allow year-round outdoor installation in the UK climate, and the fitting carries a five-year warranty from Ideal Lux.

What does IP44 mean for outdoor use?

IP44 means the fitting is protected against solid objects over 1mm and splashing water from any direction. This makes it suitable for covered porches, eaves, patios and external walls where the fitting is not directly exposed to driving rain or submersion. IP44 is not rated for fully exposed positions without overhead shelter.

What bulbs does it take?

The Flame takes two GU10 bulbs, sold separately. Most users fit warm-white LED GU10 bulbs between 3W-6W and 2700K-3000K for exterior illumination. The dimmable rating means the fitting is compatible with dimmable GU10 bulbs when paired with an appropriate dimmer switch.

Can it be installed on brick or rendered walls?

Yes. The rectangular backplate includes two fixing points for wall plugs and screws. The fitting can be mounted to brick, render, block, timber cladding or masonry surfaces. External-grade fixings should be used, and the cable entry point should be sealed to maintain the IP44 rating.

How far does it project from the wall?

The fitting projects 180mm from the wall surface when installed. The 65mm width means it sits relatively close to the wall without intruding into narrow doorways or pathways.