30W LED Outdoor Floodlight White IP65 - 2400 Lumens 4000K

The ESP 30W LED floodlight delivers 2400 lumens of 4000K neutral white light from a white die-cast aluminium housing rated IP65 for full exterior use. The integrated LED runs at 30W on 230V mains and sits behind a textured polycarbonate diffuser that spreads the beam across driveways, garden borders, commercial building exteriors and perimeter security zones.

Designed for wall or ground mounting via an adjustable bracket, the floodlight tilts through approximately 180 degrees to direct light up onto a facade, down onto a pathway, or across a car park. The bracket bolts directly to masonry or timber using the supplied fixing accessories, and the 1m power cord allows the fitting to be wired into an exterior IP-rated junction box or fed through a wall to an interior wiring point. The compact 143mm x 123mm footprint suits narrow eaves, gate posts and small wall sections where a larger floodlight would overpower the architecture.

The white powder-coated finish resists UV degradation and coastal salt spray better than bare aluminium, while the textured diffuser hides dust and minor surface marks between cleaning cycles. The IP65 ingress protection means the fitting is dust-tight and protected against low-pressure water jets from any direction, making it suitable for UK weather conditions year-round. The 4000K colour temperature sits between warm residential lighting and cool industrial white, giving a neutral tone that renders colours accurately on CCTV footage and provides clear visibility for outdoor tasks.

Product Specification Sheet

Product Manual

Does this floodlight include a PIR sensor?

No. This is a mains-wired floodlight without a built-in PIR sensor. It operates continuously when switched on via a wall switch or timer. If you need a PIR-triggered version, search for ESP floodlights with sensor options at Niori.

What is the beam angle?

The textured diffuser spreads the 2400 lumen output across a wide flood beam, typically 100-120 degrees. This suits area lighting rather than narrow spot applications. See the specification sheet in the Downloads tab for exact photometric data.

Can it be used in coastal or high-humidity locations?

Yes. The IP65 rating and powder-coated aluminium housing resist salt spray and high humidity. For prolonged coastal exposure, periodic rinsing with fresh water will extend the finish life.

What colour temperature is 4000K?

4000K is neutral white, sitting between warm residential white (2700-3000K) and cool daylight white (5000-6500K). It provides clear visibility for security and task lighting without the yellow cast of warm white or the blue tint of cool white.