Description
The Knightsbridge FLTW is an 18W LED twin spot floodlight with two independently adjustable heads mounted on a shared die-cast aluminium backplate. Each head houses a 9W chip-on-board LED producing 1455lm total output at 3500K, with a 45° beam angle that concentrates light onto driveways, doorways, pathways and building facades.
Rated IP65, the floodlight is sealed against rain, snow and dust ingress, making it suitable for outdoor installation on house walls, garage exteriors, outbuilding walls and perimeter security lighting. The two heads rotate and tilt independently on their mounting points, allowing one head to be directed at a front door while the other covers a path or driveway, or both heads to converge on a single area for higher intensity. The 205mm width and 150mm projection from the wall give sufficient spread for coverage without protruding excessively from a typical brick or render facade.
The white powder-coated aluminium finish provides corrosion resistance in coastal and high-humidity environments and pairs with white or pale-coloured render, uPVC cladding and weatherboard. The clear diffuser over each LED lens maximises light output rather than softening it, prioritising functional illumination over decorative ambience. The integrated LEDs are non-replaceable but carry a 50,000-hour L70B50 rating, equating to approximately 17 years of operation at 8 hours per night before output degrades to 70% of initial lumens.
Specification
| Height |
104 mm |
| Width |
205 mm |
| Projection |
150 mm |
| Construction |
Die-cast aluminium |
| Finish |
White |
| Class |
I |
| IP Rating |
IP65 |
| Primary Voltage |
230V 50Hz |
| Diffuser |
Clear |
| Lamp Technology |
CoB LED |
| Lamp Included |
Yes |
| Dimmable |
No |
| L70B50 |
50000 |
| Energy Rating (Class) post 2021 SLR |
E |
| Beam Angle |
45 |
| CCT |
3500 K |
| Light Colour |
White |
| Lumens |
1455 lm |
| Lumens (Light Source only) |
1870 lm |
| Wattage |
18 |
| Efficacy |
100.57 lm/W |
| CRI |
>85 |
| Warranty |
3 |
Downloads
Product Specification Sheet
Product Manual
Frequently Asked
Can the two heads be adjusted independently?
Yes. Each of the two 9W LED heads rotates and tilts on its own mounting point, allowing them to be directed at different areas or converged on a single target for higher intensity.
Is this suitable for outdoor use in all weather?
The IP65 rating confirms the floodlight is fully sealed against rain, snow and dust ingress. The die-cast aluminium construction and powder-coated finish provide corrosion resistance in coastal and high-humidity environments.
What's the expected lifespan of the LEDs?
The integrated chip-on-board LEDs carry a 50,000-hour L70B50 rating. At 8 hours of operation per night, this equates to approximately 17 years before light output degrades to 70% of the initial 1455lm. The LEDs are non-replaceable.
Does it include a sensor?
No. This model does not include a PIR sensor or photocell. It operates on a switched mains circuit and requires manual or timer control to turn on and off.