Free Delivery on all orders over £99*

6AX 2-Way 1-10V Dimmer Module

£999
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

These dimmers are for use with high frequency ballast or LED drivers that use a 1-10V DC control input, use the rotary action to control the brightness and push on/off to switch mains power on/off. The brightness control and mains switches are electrically isolated. - 6AX 250V - 2-way - 1-10V - Push On/Off, rotary dimming action - For dimmable ballast or LED drivers with 1-10V DC control input - Supplied with a Curved Edge Grid Adaptor kit so that it can be used within that system or with our range of unpopulated dimmer plates NB: For use with 1-10V ballasts/drivers only. Check the in-rush current for LED lamps or drivers does not exceed 6A, and the rating on the control signal side of the ballast/driver does not exceed 50mA before connecting. Fit inrush current limiters where necessary. Do not overload.

Specification
Height 59.8mm
Width 23mm
Depth 40.5mm
Projection 18°
Recessed Depth 22.5mm
Construction PA
Finish Black
IP Rating IP20
Primary Voltage 230V 50Hz
Downloads

Product Specification Sheet

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    These dimmers are for use with high frequency ballast or LED drivers that use a 1-10V DC control input, use the rotary action to control the brightness and push on/off to switch mains power on/off. The brightness control and mains switches are electrically isolated. - 6AX 250V - 2-way - 1-10V - Push On/Off, rotary dimming action - For dimmable ballast or LED drivers with 1-10V DC control input - Supplied with a Curved Edge Grid Adaptor kit so that it can be used within that system or with our range of unpopulated dimmer plates NB: For use with 1-10V ballasts/drivers only. Check the in-rush current for LED lamps or drivers does not exceed 6A, and the rating on the control signal side of the ballast/driver does not exceed 50mA before connecting. Fit inrush current limiters where necessary. Do not overload.

    Specification
    Height 59.8mm
    Width 23mm
    Depth 40.5mm
    Projection 18°
    Recessed Depth 22.5mm
    Construction PA
    Finish Black
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Downloads

    Product Specification Sheet