Description
The Wall Street is a 2-light outdoor wall light with two independently rotatable GU10 spotlight heads mounted on a central black powder-coated aluminium backplate. Each head can be angled to direct light where it's needed, whether that's onto a doorway, along a wall, down a pathway, or up onto architectural detail above the fitting.
Designed for exterior mounting on house facades, garage walls, patios and covered outdoor areas, the fitting carries an IP54 rating against dust ingress and water splashes from any direction. The 205mm width and low 67mm projection from the wall mean the fitting sits close to the mounting surface without dominating the facade. Each GU10 socket accepts bulbs up to 50W (sold separately), giving flexibility to choose warm white, daylight or dimmable LED bulbs depending on the installation context.
The black powder-coated aluminium construction resists corrosion from rain, salt air and temperature cycling between -20°C and +40°C, making the fitting suitable for coastal, urban and rural UK environments. The rotatable heads lock into position once angled, so the light direction stays consistent once set during installation. The matte black finish absorbs light during the day and pairs cleanly with modern render, brickwork, timber cladding and metal facades.
Specification
| Height |
6.7cm |
| Length |
6.5cm |
| Width |
20.5cm |
| Max Height |
6.7cm |
| Min Height |
6.7cm |
| Finish |
Black |
| Construction |
Aluminium |
| IP Rating |
IP54 |
| Voltage |
AC 100-240 |
| Bulb Base |
GU10 |
| Wattage |
50 |
| Warranty |
2 Year Guarantee |
Downloads
Product Manual
Frequently Asked
What bulbs does it take?
Each head takes a GU10 bulb up to 50W. Bulbs are sold separately. Most installations use 5-7W warm white LED GU10 bulbs at 2700K-3000K for exterior ambient lighting, or 6500K daylight bulbs for security lighting.
Can the heads be adjusted after installation?
Yes. Both spotlight heads rotate independently and can be angled during or after installation. Once positioned, they stay locked in place without needing additional fixings.
Is it suitable for coastal locations?
The IP54 rating protects against water splashes and the powder-coated aluminium resists corrosion from salt air. For exposed coastal sites regularly hit by wind-driven rain or sea spray, check that the fitting is mounted under an overhang or soffit where it receives some shelter.
What fixing method does it use?
The backplate mounts to the wall using two screws (typically wall plugs and screws into masonry or render). The electrical connection is made behind the backplate before the fitting is secured to the wall. Full installation instructions are in the downloadable manual.