Free Delivery on all orders over £99*

Unity Tracks Single Phase Track End Cap - White

£399
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Unity Tracks single-phase track end cap is a white plastic finishing component designed to seal open ends on Maytoni Unity single-phase track lighting systems. Measuring 6cm wide by 3.7cm long by 2cm tall, the cap clips onto the track profile to close off the conductive rail, preventing dust ingress and accidental contact with live components.

Used in retail, office and residential track lighting installations where the track terminates against a wall, in a corner, or at a defined end point rather than continuing through to another section. The end cap provides a clean visual finish and meets safety requirements by isolating the track's internal rail from exposure. Installation requires no tools — the cap pushes onto the track end until it seats against the internal stops.

The white finish matches the Unity Tracks white rail system, creating a continuous appearance where the track meets the ceiling or wall. The plastic construction is lightweight and durable enough for typical indoor use, with no maintenance required once fitted. Maytoni includes a 2-year warranty covering manufacturing defects.

Specification
Height 2cm
Length 3.7cm
Width 6cm
Finish White
Construction Plastic
Warranty 2 Year Guarantee
Downloads

Product Manual

Frequently Asked

Which track systems is this end cap compatible with?

This end cap is designed specifically for Maytoni Unity Tracks single-phase track lighting systems in white. It will not fit three-phase tracks or track systems from other manufacturers due to differences in rail profile dimensions.

How is the end cap fitted?

The end cap pushes onto the open end of the track rail until it seats against the internal stops. No screws or tools are needed. Ensure power is isolated before fitting to avoid contact with live components inside the track.

Can this be used outdoors?

No. The Unity Tracks system and this end cap are designed for indoor use only. The plastic construction and lack of weatherproofing make it unsuitable for outdoor or high-moisture environments.

How many end caps are needed per installation?

One end cap is needed for each open track end. A straight run of track terminating at both ends requires two end caps. Track runs that connect to corner joiners or continuous sections do not need end caps at those junctions.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Unity Tracks single-phase track end cap is a white plastic finishing component designed to seal open ends on Maytoni Unity single-phase track lighting systems. Measuring 6cm wide by 3.7cm long by 2cm tall, the cap clips onto the track profile to close off the conductive rail, preventing dust ingress and accidental contact with live components.

    Used in retail, office and residential track lighting installations where the track terminates against a wall, in a corner, or at a defined end point rather than continuing through to another section. The end cap provides a clean visual finish and meets safety requirements by isolating the track's internal rail from exposure. Installation requires no tools — the cap pushes onto the track end until it seats against the internal stops.

    The white finish matches the Unity Tracks white rail system, creating a continuous appearance where the track meets the ceiling or wall. The plastic construction is lightweight and durable enough for typical indoor use, with no maintenance required once fitted. Maytoni includes a 2-year warranty covering manufacturing defects.

    Specification
    Height 2cm
    Length 3.7cm
    Width 6cm
    Finish White
    Construction Plastic
    Warranty 2 Year Guarantee
    Downloads

    Product Manual

    Frequently Asked

    Which track systems is this end cap compatible with?

    This end cap is designed specifically for Maytoni Unity Tracks single-phase track lighting systems in white. It will not fit three-phase tracks or track systems from other manufacturers due to differences in rail profile dimensions.

    How is the end cap fitted?

    The end cap pushes onto the open end of the track rail until it seats against the internal stops. No screws or tools are needed. Ensure power is isolated before fitting to avoid contact with live components inside the track.

    Can this be used outdoors?

    No. The Unity Tracks system and this end cap are designed for indoor use only. The plastic construction and lack of weatherproofing make it unsuitable for outdoor or high-moisture environments.

    How many end caps are needed per installation?

    One end cap is needed for each open track end. A straight run of track terminating at both ends requires two end caps. Track runs that connect to corner joiners or continuous sections do not need end caps at those junctions.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.