Description
The Trilogy is a 305mm semi-flush ceiling light built around a flattened globe of clear seeded glass held between two old bronze metal bands. A single E27 bulb sits inside the glass enclosure, visible through the seeded texture, and mounts 248mm down from the ceiling on a short stem with an arched support frame. The seeded glass traps bubbles and imperfections within the material, scattering light evenly while retaining a textured visual effect.
Designed for rooms with ceiling heights below 2.5m where a pendant would hang too low, the Trilogy works in hallways, landings, low-ceilinged kitchens, and bedroom alcoves. The 305mm diameter gives enough presence to anchor a 2-3m hallway without dominating the ceiling plane. The old bronze finish — a dark, oil-rubbed metal tone — pairs with both warm traditional interiors and industrial-leaning schemes that use exposed brick, dark metals and reclaimed timber.
The glass shade is held in compression between the upper and lower metal bands, each of which screws onto the central stem during installation. The E27 fitting accepts any standard bulb up to 60W (sold separately), with most users pairing the fitting with a warm-white LED filament bulb to emphasise the seeded glass texture. The 248mm drop keeps the fitting clear of door frames in standard UK homes with 2.4m ceiling heights.
Specification
| Fitting Height |
248mm |
| Diameter |
305mm |
| Width |
305mm |
| Maximum Wattage |
60W |
| Socket |
E27 |
| Bulb(s) Included |
No |
| Guarantee |
2 Year Guarantee |
Frequently Asked
What bulb does it take?
The Trilogy takes a standard E27 (Edison screw) bulb up to 60W. Bulbs are sold separately. A warm-white LED filament bulb in the 6-10W range works well with the seeded glass and old bronze finish, creating ambient hallway or landing light.
What ceiling height is needed?
The 248mm drop from ceiling to the bottom of the glass shade suits standard UK homes with 2.4m ceiling heights, leaving clearance above door frames. For rooms with ceilings below 2.3m, check that the fitting will not obstruct doorways or head height in the installation position.
What is seeded glass?
Seeded glass is blown or cast with small air bubbles trapped inside the material, giving it a textured, slightly cloudy appearance. It scatters light more evenly than clear glass while still allowing the bulb filament to be visible, adding visual interest when the light is both on and off.
Can it be installed on a sloped ceiling?
No. The Trilogy is a semi-flush ceiling light designed for flat, horizontal ceilings only. The arched support frame and central stem require a level mounting surface to hang correctly.