Description
The Times Square is a 16cm rectangular outdoor wall light with an integrated 6W LED module emitting 3000K warm white light through a bottom aperture, casting a downward wash onto the wall below. Built from powder-coated aluminium in matt black, the fitting weighs approximately 0.3kg and carries an IP54 rating for protection against dust ingress and water splashes from any direction.
Designed for external wall mounting on porches, entrance lobbies, garage sides and perimeter pathways, the Times Square provides functional downward illumination rather than ambient flood lighting. The 6W LED output suits marking doorways, illuminating house numbers, or providing low-level path guidance without overpowering adjacent planting or ground features. The 5.5cm projection from the wall keeps the fitting close to the mounting surface, making it suitable for narrow walkways and areas where clearance is limited.
The aluminium construction resists corrosion in coastal and high-humidity environments, and the powder-coat finish tolerates UV exposure without fading over typical lifespans. The integrated LED removes the need for bulb replacement, though the entire module would need replacing if the LED fails after the warranty period. The rectangular profile and clean black finish pair with modern and industrial architecture, particularly where the building uses dark cladding, render or brick.
Specification
| Height |
16cm |
| Length |
5.5cm |
| Width |
9cm |
| Max Height |
16cm |
| Min Height |
16cm |
| Finish |
Black |
| Construction |
Metal |
| IP Rating |
IP54 |
| Voltage |
AC 100-240 |
| Wattage |
6 |
| Colour Temperature |
3000K |
| Min Colour Temperature |
3000K |
| Warranty |
3 Year Guarantee |
Downloads
Product Manual
Frequently Asked
What does IP54 mean for outdoor use?
IP54 indicates protection against dust ingress (the '5') and water splashes from any direction (the '4'). The Times Square can be mounted in locations exposed to rain and wind-driven spray, but it is not submersible and should not be installed where it would be submerged or subject to high-pressure water jets.
Can the LED be replaced if it fails?
The LED is integrated into the fitting and is not user-replaceable. If the LED fails outside the 3-year warranty period, the entire fitting would need to be replaced. Integrated LEDs in this class typically have lifespans of 25,000-30,000 hours.
Does it need a separate driver or transformer?
The Times Square operates on AC 100-240V mains voltage and includes all necessary internal components. It connects directly to standard mains wiring and does not require an external driver or transformer.
How is it mounted to the wall?
The fitting mounts to an external wall via a rear backplate using two screw fixings. The installation requires access to a mains electrical supply and should be carried out by a qualified electrician, particularly where outdoor wiring runs are involved.