Free Delivery on all orders over £99*
Save 30%

Spark Constant Current Dimmable LED Driver - 32W 700mA

£7999
RRP £11400
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Spark is a 32W constant current LED driver from Ideal Lux that delivers a stable 700mA output to power medium-sized LED lighting installations. The driver regulates current rather than voltage, ensuring consistent brightness across connected LED panels, strips or downlights without flicker or fluctuation as individual LEDs age or if load varies slightly.

Designed for indoor residential, office and retail installations where LED lighting needs controlled power, the driver fits inside ceiling voids, behind wall panels or within recessed housings. The compact 94mm × 67mm plastic case allows installation in tight spaces where larger drivers won't fit, and the IP20 rating confirms it's suitable for standard dry interior environments but must be protected from moisture and dust ingress.

The driver supports phase-cut dimming via compatible wall dimmers, allowing brightness control from full output down to low ambient levels depending on the specific dimmer model used. The 32W capacity handles LED loads between approximately 24-32W depending on the exact forward voltage of the LEDs being driven, making it appropriate for runs of LED strip up to 4-5m, small panels, or clusters of 4-6 downlights rated at 5-6W each.

Specification
Length (mm) 94
Projection (mm) 67
Dimmable Yes
IP Rating IP20
Warranty 5 Years
Frequently Asked

What type of dimmer does this work with?

The Spark supports phase-cut dimming (leading-edge or trailing-edge). Compatibility depends on the specific dimmer model and the total LED load. Test with your dimmer before final installation, as some older dimmer switches designed for incandescent loads may cause buzzing or limited dimming range with LED drivers.

Can this be used in bathrooms?

No. The IP20 rating means the driver is suitable for dry indoor environments only and must be protected from moisture. It cannot be installed in bathroom zones where water spray or high humidity is present. For bathroom LED installations, choose an IP44 or IP65 rated driver.

How many LED downlights can this power?

The 32W output at 700mA typically powers 4-6 LED downlights rated at 5-6W each, depending on the exact forward voltage of the LEDs. Check the total wattage and current requirements of your specific LED fittings to confirm compatibility.

Does it need ventilation when installed?

Yes. Like all LED drivers, the Spark generates heat during operation. Install in a location with adequate air circulation and avoid burying it under thermal insulation or in completely sealed enclosures, as this will shorten the driver's lifespan.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Spark is a 32W constant current LED driver from Ideal Lux that delivers a stable 700mA output to power medium-sized LED lighting installations. The driver regulates current rather than voltage, ensuring consistent brightness across connected LED panels, strips or downlights without flicker or fluctuation as individual LEDs age or if load varies slightly.

    Designed for indoor residential, office and retail installations where LED lighting needs controlled power, the driver fits inside ceiling voids, behind wall panels or within recessed housings. The compact 94mm × 67mm plastic case allows installation in tight spaces where larger drivers won't fit, and the IP20 rating confirms it's suitable for standard dry interior environments but must be protected from moisture and dust ingress.

    The driver supports phase-cut dimming via compatible wall dimmers, allowing brightness control from full output down to low ambient levels depending on the specific dimmer model used. The 32W capacity handles LED loads between approximately 24-32W depending on the exact forward voltage of the LEDs being driven, making it appropriate for runs of LED strip up to 4-5m, small panels, or clusters of 4-6 downlights rated at 5-6W each.

    Specification
    Length (mm) 94
    Projection (mm) 67
    Dimmable Yes
    IP Rating IP20
    Warranty 5 Years
    Frequently Asked

    What type of dimmer does this work with?

    The Spark supports phase-cut dimming (leading-edge or trailing-edge). Compatibility depends on the specific dimmer model and the total LED load. Test with your dimmer before final installation, as some older dimmer switches designed for incandescent loads may cause buzzing or limited dimming range with LED drivers.

    Can this be used in bathrooms?

    No. The IP20 rating means the driver is suitable for dry indoor environments only and must be protected from moisture. It cannot be installed in bathroom zones where water spray or high humidity is present. For bathroom LED installations, choose an IP44 or IP65 rated driver.

    How many LED downlights can this power?

    The 32W output at 700mA typically powers 4-6 LED downlights rated at 5-6W each, depending on the exact forward voltage of the LEDs. Check the total wattage and current requirements of your specific LED fittings to confirm compatibility.

    Does it need ventilation when installed?

    Yes. Like all LED drivers, the Spark generates heat during operation. Install in a location with adequate air circulation and avoid burying it under thermal insulation or in completely sealed enclosures, as this will shorten the driver's lifespan.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.