Free Delivery on all orders over £99*
Save 30%

Radiara 10W Constant Current Dimmable LED Driver - 300mA, 1-10V

£10499
RRP £15000
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Radiara is a 10W constant current LED driver from Ideal Lux, delivering 300mA output with 1-10V dimming control. Constant current regulation maintains stable 300mA output regardless of mains voltage fluctuation, protecting connected LEDs from thermal runaway and extending their operational lifespan. The driver converts 230V mains to low-voltage DC suitable for LED modules, panels and strip light applications.

Designed for indoor residential, office and retail installations, the driver fits recessed ceiling voids, behind LED panels, or within purpose-built luminaire housings. The 130mm x 43mm footprint allows mounting in typical 150mm ceiling voids without requiring additional depth. The 1-10V dimming protocol is compatible with standard commercial dimmer control systems and works by reducing current output in proportion to the control voltage applied between 1V (minimum dim) and 10V (full brightness).

The white polythene casing carries IP20 rating, meaning it is protected against solid objects larger than 12.5mm but not against moisture ingress — this driver is suitable for dry indoor locations only and must not be used in bathrooms, outdoor canopies or other damp environments. The driver includes short-circuit, overload and over-temperature protection circuits that shut down output if fault conditions are detected, preventing damage to both the driver and connected LED load.

Specification
Length (mm) 130
Projection (mm) 43
Dimmable Yes
IP Rating IP20
Warranty 5 Years
Frequently Asked

What type of dimming does it support?

The Radiara uses 1-10V dimming protocol. This requires a compatible 1-10V dimmer control unit (sold separately) which sends a low-voltage control signal to the driver. Trailing-edge domestic dimmers will not work with this driver.

What LED load can it drive?

The driver outputs 300mA constant current at up to 10W. It is designed for LED modules, panels or strip lights with a forward voltage between approximately 30-34V. Check the voltage and current requirements of your LED product before connecting to ensure compatibility.

Can it be used in bathrooms or outdoors?

No. The IP20 rating means the driver is not protected against moisture ingress and must only be installed in dry indoor locations. For bathrooms or outdoor use, an IP44 or IP65 rated driver is required.

Where is the driver typically mounted?

The driver is usually mounted in a ceiling void above the LED fitting, inside a luminaire housing, or behind an LED panel. It requires adequate ventilation to dissipate heat and must not be covered with insulation material.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Radiara is a 10W constant current LED driver from Ideal Lux, delivering 300mA output with 1-10V dimming control. Constant current regulation maintains stable 300mA output regardless of mains voltage fluctuation, protecting connected LEDs from thermal runaway and extending their operational lifespan. The driver converts 230V mains to low-voltage DC suitable for LED modules, panels and strip light applications.

    Designed for indoor residential, office and retail installations, the driver fits recessed ceiling voids, behind LED panels, or within purpose-built luminaire housings. The 130mm x 43mm footprint allows mounting in typical 150mm ceiling voids without requiring additional depth. The 1-10V dimming protocol is compatible with standard commercial dimmer control systems and works by reducing current output in proportion to the control voltage applied between 1V (minimum dim) and 10V (full brightness).

    The white polythene casing carries IP20 rating, meaning it is protected against solid objects larger than 12.5mm but not against moisture ingress — this driver is suitable for dry indoor locations only and must not be used in bathrooms, outdoor canopies or other damp environments. The driver includes short-circuit, overload and over-temperature protection circuits that shut down output if fault conditions are detected, preventing damage to both the driver and connected LED load.

    Specification
    Length (mm) 130
    Projection (mm) 43
    Dimmable Yes
    IP Rating IP20
    Warranty 5 Years
    Frequently Asked

    What type of dimming does it support?

    The Radiara uses 1-10V dimming protocol. This requires a compatible 1-10V dimmer control unit (sold separately) which sends a low-voltage control signal to the driver. Trailing-edge domestic dimmers will not work with this driver.

    What LED load can it drive?

    The driver outputs 300mA constant current at up to 10W. It is designed for LED modules, panels or strip lights with a forward voltage between approximately 30-34V. Check the voltage and current requirements of your LED product before connecting to ensure compatibility.

    Can it be used in bathrooms or outdoors?

    No. The IP20 rating means the driver is not protected against moisture ingress and must only be installed in dry indoor locations. For bathrooms or outdoor use, an IP44 or IP65 rated driver is required.

    Where is the driver typically mounted?

    The driver is usually mounted in a ceiling void above the LED fitting, inside a luminaire housing, or behind an LED panel. It requires adequate ventilation to dissipate heat and must not be covered with insulation material.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.