Description
The Onda is a single-head LED spotlight built around an 18W 3000K integrated LED housed in a cylindrical aluminium body with a matt black finish. The spotlight head rotates 355° horizontally and tilts 90° vertically on a surface-mount base, allowing the beam to be aimed at walls, ceilings, artwork or specific zones within a room. An anti-glare grille recessed into the head softens the light at the edge of the beam and reduces direct LED glare when the spotlight is angled towards eye level.
Designed for ceiling or wall mounting in residential living rooms, bedrooms, kitchens and commercial offices, the Onda delivers warm 3000K light suitable for accent lighting, task lighting or general ambient fill depending on how the head is angled. The 12cm diameter base covers a standard ceiling rose or wall-mounted back box, and the 8.2cm projection from the surface keeps the fitting compact enough for rooms with ceiling heights of 2.4m or above. The IP20 rating limits use to dry indoor areas.
The aluminium construction provides a lightweight 0.6kg fitting that does not require additional ceiling reinforcement when surface-mounted. The matt black finish absorbs reflections and pairs with both monochrome interiors and warmer-toned schemes where black acts as a neutral accent. The integrated LED removes the need for separate bulb purchases and runs on standard AC 220-240V mains without requiring a separate driver box in most UK installations.
Maytoni backs the Onda with a 5-year warranty covering the LED module, driver and aluminium housing. The 18W output at 3000K provides approximately 1,500-1,600 lumens depending on the specific LED module batch, which is sufficient to highlight a 2-3m wall section or provide task lighting over a desk or kitchen worktop when the head is angled downwards.
Specification
| Height |
8.2cm |
| Diameter |
12cm |
| Finish |
Black |
| Construction |
Aluminium |
| IP Rating |
IP20 |
| Voltage |
AC 220-240 |
| Wattage |
18 |
| Colour Temperature |
3000K |
| Warranty |
5 Year Guarantee |
Downloads
Product Manual
Frequently Asked
Can the spotlight head be adjusted after installation?
Yes. The head rotates 355° horizontally and tilts 90° vertically, allowing the beam to be redirected without removing the fitting from the ceiling or wall. The rotation is smooth enough to adjust by hand but firm enough to hold position once set.
Is the LED replaceable?
No. The 18W LED is integrated into the spotlight housing and is not user-replaceable. Maytoni provides a 5-year warranty covering the LED module, and the expected LED lifespan is approximately 30,000-50,000 hours depending on operating conditions.
Can it be used in bathrooms?
No. The IP20 rating means the Onda is suitable only for dry indoor areas. It cannot be used in bathrooms, wet rooms, or any zone where moisture or direct water contact is present.
Does it require a separate driver box?
The Onda runs on standard AC 220-240V mains. Most UK installations do not require a separate driver box, as the LED driver is integrated into the fitting. Check the product manual or consult an electrician if wiring to a non-standard circuit.