Maytoni Trinity 3-Phase Left T-Shaped Track Connector - Black

The Maytoni Trinity left T-shaped connector is a three-way junction piece for 3-phase track lighting systems, allowing a perpendicular track run to branch left from a main track line. The connector maintains electrical continuity across all three phases through the junction, enabling independently-switched circuits to continue through the T-junction without phase interruption.

Designed for surface-mounted track installations in retail, gallery, hospitality and residential settings where track runs need to turn corners or create L-shaped or T-shaped layouts. The connector measures 166mm along the main axis and 99mm along the branch axis, with a 32mm height that matches standard Maytoni Trinity track profile. The black finish sits flush with black Trinity track sections, creating a continuous visual line across junctions.

The plastic body houses three independent conductor rails rated for 220-240V AC, with spring-loaded contacts that grip the track rails when the connector is clipped into position. The IP20 rating suits dry indoor environments. The left-hand orientation means the branch track exits to the left when standing at the end of the main track looking towards the junction — a right-hand version exists separately for opposite-direction layouts.

Product Manual

What's the difference between left and right T-connectors?

The orientation describes which direction the branch track exits when you're standing at the end of the main track looking towards the junction. A left T-connector sends the branch track to your left; a right T-connector sends it to your right. Check your track layout plan before ordering to ensure you select the correct orientation.

Is this compatible with single-phase track systems?

No. This connector is designed specifically for 3-phase track systems where three independent circuits run through the track. It will not work with single-phase or 2-phase track systems, even if the physical dimensions appear similar.

Can it be used with other brands of 3-phase track?

Maytoni Trinity connectors are designed for Maytoni Trinity track. While some 3-phase track systems share similar dimensions, conductor spacing and contact design vary between manufacturers. Mixing brands may result in poor electrical contact or physical incompatibility. We recommend using Maytoni connectors with Maytoni track throughout the installation.

How is the connector fitted to the track?

The connector clips into the track rails using spring-loaded contacts. Align the connector with the open ends of two track sections, ensure the conductor rails are correctly oriented to match the track phase sequence, then push the connector firmly into place until the spring contacts grip. Full fitting instructions are in the product manual linked above.