Free Delivery on all orders over £99*

Maytoni 10W LED Square Recessed Downlight 3000K - Black Tiltable

£4499
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Maytoni DL093 is a 95mm square recessed downlight with a tiltable LED head, delivering 10W at 3000K warm white through an integrated LED. The fitting sits flush with the ceiling when installed, with a black aluminium surround framing the inner reflector assembly which can be angled to direct light onto walls, artwork, or specific areas of a room rather than straight down.

Designed for residential and commercial installation, the downlight suits hallways, retail display areas, living rooms, bedrooms and kitchens where directed accent lighting is needed. The tilt mechanism allows the beam to be adjusted after installation without removing the fitting, making it useful for highlighting features or creating wall-wash effects. The 95mm aperture requires a ceiling void depth of at least 75mm to accommodate the housing.

The black aluminium construction gives a defined edge against white or light-coloured ceilings, creating a visible border rather than blending in. The IP20 rating limits this fitting to dry indoor areas only — it is not suitable for bathrooms, shower rooms or outdoor soffits. The integrated LED operates on AC 160-265V mains supply, making it compatible with standard UK wiring without requiring a separate driver or transformer.

Specification
Height 7.5cm
Length 9.5cm
Width 9.5cm
Finish Black
Construction Aluminium, Metal
IP Rating IP20
Voltage AC 160-265
Wattage 10
Colour Temperature 3000K
Warranty 2 Year Guarantee
Downloads

Product Manual

Frequently Asked

Can the downlight be used in a bathroom?

No. The IP20 rating means this fitting is only suitable for dry indoor areas. Bathrooms require IP44 or higher depending on the zone. For bathroom downlights, see the dedicated bathroom lighting section at Niori.

Is the LED replaceable?

The LED is integrated into the fitting and cannot be replaced separately. The LED is rated for approximately 25,000-30,000 hours of use, which equates to 10-15 years at typical residential usage levels before the entire fitting would need replacing.

What ceiling void depth is required?

The fitting is 75mm deep, so a ceiling void of at least 75mm is needed to accommodate the housing above the plasterboard or ceiling surface. If the void is shallower, this fitting will not fit.

Can the tilt be adjusted after installation?

Yes. The inner reflector and LED assembly can be tilted on its axis after the fitting is installed and powered, allowing the beam direction to be adjusted without removing the downlight from the ceiling.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Maytoni DL093 is a 95mm square recessed downlight with a tiltable LED head, delivering 10W at 3000K warm white through an integrated LED. The fitting sits flush with the ceiling when installed, with a black aluminium surround framing the inner reflector assembly which can be angled to direct light onto walls, artwork, or specific areas of a room rather than straight down.

    Designed for residential and commercial installation, the downlight suits hallways, retail display areas, living rooms, bedrooms and kitchens where directed accent lighting is needed. The tilt mechanism allows the beam to be adjusted after installation without removing the fitting, making it useful for highlighting features or creating wall-wash effects. The 95mm aperture requires a ceiling void depth of at least 75mm to accommodate the housing.

    The black aluminium construction gives a defined edge against white or light-coloured ceilings, creating a visible border rather than blending in. The IP20 rating limits this fitting to dry indoor areas only — it is not suitable for bathrooms, shower rooms or outdoor soffits. The integrated LED operates on AC 160-265V mains supply, making it compatible with standard UK wiring without requiring a separate driver or transformer.

    Specification
    Height 7.5cm
    Length 9.5cm
    Width 9.5cm
    Finish Black
    Construction Aluminium, Metal
    IP Rating IP20
    Voltage AC 160-265
    Wattage 10
    Colour Temperature 3000K
    Warranty 2 Year Guarantee
    Downloads

    Product Manual

    Frequently Asked

    Can the downlight be used in a bathroom?

    No. The IP20 rating means this fitting is only suitable for dry indoor areas. Bathrooms require IP44 or higher depending on the zone. For bathroom downlights, see the dedicated bathroom lighting section at Niori.

    Is the LED replaceable?

    The LED is integrated into the fitting and cannot be replaced separately. The LED is rated for approximately 25,000-30,000 hours of use, which equates to 10-15 years at typical residential usage levels before the entire fitting would need replacing.

    What ceiling void depth is required?

    The fitting is 75mm deep, so a ceiling void of at least 75mm is needed to accommodate the housing above the plasterboard or ceiling surface. If the void is shallower, this fitting will not fit.

    Can the tilt be adjusted after installation?

    Yes. The inner reflector and LED assembly can be tilted on its axis after the fitting is installed and powered, allowing the beam direction to be adjusted without removing the downlight from the ceiling.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.