Description
The Light Stick is a 60cm vertical LED wall light built from aluminium with a brass finish, housing an integrated 7W LED module behind a white acrylic diffuser. The LED produces 3000K warm white light and operates on 220-240V mains without requiring a separate bulb fitting or driver box visible on the wall.
Designed for hallways, staircases, bedrooms and living room accent positions, the narrow 7cm width and vertical orientation allow the Light Stick to sit alongside door frames, between wall panels, or in alcoves where horizontal fittings would be too wide. The acrylic diffuser spreads light evenly along the 60cm length, providing ambient illumination without direct glare. The IP20 rating confirms this is an interior-only fitting and is not suitable for bathrooms or outdoor use.
The brass finish on the aluminium body provides warm metallic contrast against white, grey or neutral wall colours. The construction is metal throughout with no visible plastic components on the faceplate. The integrated LED removes the need for bulb changes during the fitting's operational life, and the 7W power draw is substantially lower than equivalent halogen wall lights. The fitting mounts on a concealed backplate with the diffuser and body forming a single sealed unit once installed.
From Maytoni, a European lighting manufacturer producing contemporary and classical ranges across residential and hospitality categories. The Light Stick carries a 3-year manufacturer warranty covering electrical and build defects.
Specification
| Height |
60cm |
| Length |
9cm |
| Width |
7cm |
| Finish |
Brass |
| Construction |
Aluminium, Metal |
| IP Rating |
IP20 |
| Voltage |
AC 220-240 |
| Wattage |
7 |
| Colour Temperature |
3000K |
| Warranty |
3 Year Guarantee |
Downloads
Product Manual
Frequently Asked
Can the LED be replaced if it fails?
The LED module is integrated into the fitting and is not user-replaceable. The 3-year manufacturer warranty covers LED failure during normal use. LED modules in this category typically provide 25,000+ hours of operation before significant light degradation.
Is this suitable for bathroom installation?
No. The IP20 rating means the fitting has no protection against moisture ingress and must only be installed in dry interior locations outside bathroom zones.
Does it need a separate driver or transformer?
No. The Light Stick operates directly on 220-240V AC mains power. The driver circuitry is built into the fitting behind the faceplate, so no external driver box is required.
What wall colour works best with the brass finish?
The brass finish contrasts well against white, off-white, light grey and neutral wall colours. On darker walls the brass body becomes less visually distinct, though the light output remains the same.