Description
The Jens-2 is a 6W LED outdoor wall light built from die-cast aluminium with a black powder-coated finish and a polycarbonate lens set into an angled oval aperture. A built-in switch on the rear of the fitting allows selection between three colour temperatures — 3000K warm white, 4000K neutral white, and 5700K cool daylight — without rewiring or replacing the LED module.
Designed for contemporary exterior walls, the Jens-2 suits residential front entrances, modern extension facades, garage walls and commercial building exteriors where architectural wash lighting is needed. The IP65 rating provides full protection against dust ingress and low-pressure water jets, making the fitting suitable for coastal locations and exposed walls where rainfall and splashing are regular. The angled lens directs light outwards and downwards rather than directly into viewing angles, reducing glare when approaching the wall.
The die-cast aluminium body gives the fitting structural rigidity and heat dissipation for the integrated LED, allowing the 6W module to run without auxiliary cooling fans or external driver boxes. The 90mm height and 135mm width keep the profile compact on narrow wall sections and gatepost faces. The black finish is a textured powder coat that hides minor scratches and weathers without obvious fading in UV exposure.
Installation requires a standard outdoor-rated back box and waterproof cable glands. The colour temperature switch is accessible only from the rear during fitting, so the choice between warm, neutral or cool white should be made before final mounting. Once set, the switch remains concealed and tamper-proof.
Specification
| Height |
90mm |
| Diameter |
135mm |
| Width |
|
Frequently Asked
How do I change the colour temperature?
A switch on the rear of the fitting toggles between 3000K, 4000K and 5700K. The switch is only accessible during installation before the fitting is mounted to the wall, so the colour temperature should be selected before final fixing.
Is it suitable for coastal locations?
Yes. The IP65 rating and die-cast aluminium construction provide full protection against salt spray, rain and dust ingress. The powder-coated finish resists corrosion in coastal environments.
Can it be used on a covered porch or must it be fully exposed?
The Jens-2 is rated for fully exposed exterior use, so it works equally well on covered porches, under eaves, or on open walls. The IP65 rating means it does not require shelter from rain.
What mounting orientation is recommended?
The angled lens is designed to sit horizontally when the fitting is mounted vertically on a wall, directing light outwards and downwards. Mounting the fitting upside-down or on its side will change the light direction but does not affect IP rating or safety.