Description
The Halion is a 3-light flush ceiling fitting with three white blown glass disc diffusers clustered on a brass plated metal base. Each diffuser houses a GX53 bulb (sold separately) — a low-profile lamp format that allows the entire fitting to sit close against the ceiling at just 130mm projection. The glass itself is acid-etched and cased, giving it an opalescent white finish that softens and diffuses the light output.
Designed for low-ceiling spaces where a pendant would hang too far into the room, the Halion suits hallways, bedrooms, bathrooms (IP20 rated — suitable for zone 3 or outside bathroom zones), and residential landings with ceiling heights under 2.4m. The 460mm diameter base covers a standard ceiling rose and the clustered arrangement of the three discs provides both ambient light and a decorative focal point without taking up vertical headroom.
The brass plating on the metal base provides a warm metallic accent that pairs well with both traditional brass fixtures and warmer-toned contemporary interiors. The white glass diffusers contrast cleanly against the brass, giving definition to each disc and preventing the fitting from reading as a single amorphous mass when viewed from below. At 400mm projection from the ceiling, the fitting sits noticeably proud but remains within the low-ceiling zone where pendants would be impractical.
The Halion is dimmable when paired with dimmable GX53 bulbs and a compatible dimmer switch. The IP20 rating limits the fitting to dry indoor spaces or bathroom zone 3 (more than 600mm from a shower or bath). Ideal Lux backs the fitting with a 5-year warranty covering manufacturing defects and electrical components.
Specification
| Length (mm) |
460 |
| Projection (mm) |
400 |
| Dimmable |
Yes |
| Number Of Bulbs |
3 |
| Bulb Type |
GX53 |
| IP Rating |
IP20 |
| Warranty |
5 Years |
Frequently Asked
What bulbs does the Halion take?
The fitting takes three GX53 bulbs (sold separately). GX53 is a low-profile disc-format bulb with a two-pin twist-lock base, commonly available in LED versions between 5W and 11W. Most users pair this fitting with warm-white LED GX53s at 2700K-3000K.
Is the Halion suitable for low ceilings?
Yes. At 400mm projection from the ceiling and 460mm diameter, the Halion is designed specifically for spaces where a traditional pendant would hang too low. It works well in rooms with ceiling heights between 2.2m and 2.5m.
Can it be used in a bathroom?
The IP20 rating means the fitting is suitable for dry indoor spaces or bathroom zone 3 (more than 600mm horizontally from a shower or bath). It is not rated for direct moisture exposure in zones 1 or 2.
Is it dimmable?
Yes, when paired with dimmable GX53 bulbs and a compatible dimmer switch. The fitting itself supports dimming but requires dimmable bulbs to function on a dimmed circuit.