Description
The AI Collaboration is a rechargeable LED table lamp built around a slender gold aluminium stem and circular base, with a low-profile drum shade housing an integrated 3W LED. The LED offers adjustable colour temperature from warm 2200K candlelight tones to neutral 4000K daylight, controlled via a touch-sensitive panel on the top surface. A single charge provides up to 8 hours of continuous runtime, allowing the lamp to be moved freely between rooms or used outdoors on balconies and patios without mains connection.
Designed for dining tables, bedside positions, side tables and hospitality settings where flexibility matters, the lamp removes the need for trailing cables and fixed socket positions. The 12cm diameter base and 34.5cm height keep the footprint compact enough for smaller surfaces while maintaining stability when the battery is depleted and the lamp is plugged in for charging. The touch switch cycles through three brightness levels and the full colour temperature range, allowing precise control over ambiance without physical buttons or remote controls.
The gold finish is applied to machined aluminium rather than painted steel, giving a solid metallic appearance that resists chips and wear better than powder-coated surfaces. The shade directs most light downwards onto the table surface while allowing a controlled glow through the perimeter gap between shade and stem, creating subtle uplighting onto nearby walls. The IP20 rating limits the lamp to dry indoor environments and covered outdoor areas protected from rain.
Maytoni developed the AI Collaboration range using parametric design software to optimise proportions and material efficiency, which is reflected in the lamp's minimal form and clean geometric lines. The gold variant pairs comfortably with warm-toned interiors, brass hardware, and natural timber finishes, while contrasting effectively against darker walls and furniture in contemporary settings.
Specification
| Height |
34.5cm |
| Diameter |
12cm |
| Finish |
Gold |
| Construction |
Aluminium |
| IP Rating |
IP20 |
| Voltage |
AC 220-240 |
| Wattage |
3 |
| Colour Temperature |
Adjustable color temperature 2200-4000 K |
| Min Colour Temperature |
2200K |
| Max Colour Temperature |
4000K |
| Dimmable |
Yes |
| Warranty |
3 Year Guarantee |
Downloads
Product Manual
Frequently Asked
How long does the battery last on a full charge?
The integrated battery provides up to 8 hours of continuous runtime at medium brightness. Higher brightness settings and cooler colour temperatures reduce battery life slightly, while lower settings can extend runtime beyond 8 hours. The lamp recharges fully in approximately 4-5 hours when connected to mains power.
How do you change the colour temperature and brightness?
The touch-sensitive panel on top of the shade controls both functions. Tap once to turn the lamp on or off. Hold your finger on the panel to cycle through brightness levels. A longer press switches between colour temperature settings from warm 2200K through to neutral 4000K.
Can it be used while charging?
Yes. The lamp can remain connected to mains power and operate normally while the battery charges. This makes it suitable for permanent bedside or desk positions where portability is not required, or for ensuring the battery is topped up between portable uses.
Is it suitable for outdoor use?
The IP20 rating limits the lamp to dry environments. It can be used on covered balconies, terraces and patios where it is protected from rain, but should not be left exposed to weather. Bring the lamp indoors during wet conditions to prevent moisture ingress.