{"product_id":"zon-60-6cm-round-recessed-downlight-mounting-ring-white","title":"Zon 60.6cm Round Recessed Downlight Mounting Ring - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zon is a 60.6cm diameter mounting ring designed to support large round recessed downlights within ceiling voids. Constructed from white-finished metal, the ring provides a structural frame that bridges the gap between the ceiling cut-out and the downlight housing, distributing the weight of the fitting across the ceiling joists or plasterboard edge.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation where large-diameter recessed downlights are specified, the Zon suits ceiling heights of 2.4m or above where a flush-mounted light source is needed without visible suspension. The 60.6cm aperture accommodates downlights in the 550-600mm diameter range, commonly used for high-output LED panels in lobbies, open-plan living areas, commercial offices and retail spaces. The ring sits between the ceiling surface and the downlight trim, concealing the cut edge and providing a clean finished appearance once the downlight is installed.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated metal finish matches standard white ceilings and downlight trims, maintaining a seamless ceiling plane. The 67.2cm outer diameter provides a mounting flange wide enough to span typical joist centres (400-600mm), and the 6.4cm height gives clearance for most LED driver units and wiring within the ceiling void. The IP20 rating confirms suitability for dry internal environments only — this is not a bathroom or outdoor-rated component.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e67.2cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e60.6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat downlight sizes does this ring accommodate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 60.6cm aperture suits round recessed downlights with trim diameters between 550mm and 600mm. Check the downlight manufacturer's specifications to confirm the required cut-out diameter before ordering the mounting ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ring itself adds 6.4cm of height within the void. The total clearance needed depends on the specific downlight housing and driver unit being installed — most large recessed LED panels require 80-120mm of ceiling void depth including the mounting ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating confirms this mounting ring is only suitable for dry internal environments. For bathroom or outdoor installation, a higher IP-rated mounting system is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the ring fixed to the ceiling structure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 67.2cm outer diameter provides a mounting flange that sits on top of the ceiling surface or spans between ceiling joists. Fixings depend on the ceiling construction — plasterboard installations typically use toggle fixings or batten supports, while concrete or solid ceilings may require direct screws or anchors. Installation should be carried out by a qualified electrician.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45800693432587,"sku":"DLA032-TRS90-W","price":84.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DLA032-TRS90-W_on_w_standard_3d564544-b2f6-4cb8-ae14-383eb1f1d48a.jpg?v=1737120920","url":"https:\/\/niori.co.uk\/products\/zon-60-6cm-round-recessed-downlight-mounting-ring-white","provider":"Niori","version":"1.0","type":"link"}