{"product_id":"voltis-9w-constant-current-dimmable-led-driver-1-10v-250ma","title":"Voltis 9W Constant Current Dimmable LED Driver - 1-10V, 250mA","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Voltis is a 9W constant current LED driver with 1-10V dimming control, delivering 250mA output to power compatible LED fixtures. The driver sits inside a white plastic housing measuring 122mm long by 40mm wide by 30mm high, designed to fit into ceiling voids, wall cavities or the back boxes of ceiling panels where space is limited.\u003c\/p\u003e\n\u003cp\u003eConstant current drivers maintain a fixed amperage (250mA in this case) regardless of load variation, which protects LED arrays from current spikes and extends the operating life of the fixture. The 1-10V dimming protocol allows smooth dimming when paired with a compatible 1-10V controller or wall dimmer, with dimming range typically from 10% to 100% depending on the LED load. The driver operates on 220-240V AC mains input and converts this to the lower DC voltage required by the LED.\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating limits the Voltis to dry indoor locations only — it is not suitable for bathrooms, outdoor installations or any area where moisture is present. The white plastic housing includes mounting tabs at each end for screw-fixing to timber joists or metal back boxes. Wiring terminals accept 0.5-1.5mm² cable and follow standard colour coding: brown (live in), blue (neutral in), black (DC positive out), white (DC negative out), plus separate terminals for the 1-10V dimming control wire.\u003c\/p\u003e\n\u003cp\u003eThe driver carries CE certification and a 5-year warranty from Ideal Lux, with thermal overload protection built into the circuit to shut down the output if the unit exceeds safe operating temperature. The compact 122mm length fits standard UK ceiling void depths and the 9W output suits small-to-medium LED panels, downlights and strip lighting installations requiring 250mA constant current.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength (mm)\u003c\/td\u003e\n\u003ctd\u003e122\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection (mm)\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does constant current mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA constant current driver maintains a fixed amperage (250mA) to the LED load regardless of voltage variation. This protects LED arrays from current spikes and extends the life of the fixture compared to constant voltage drivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LED fixtures is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Voltis suits LED panels, downlights and strip lighting rated for 250mA constant current operation and up to 9W total load. Check the fixture specification to confirm it requires 250mA constant current rather than constant voltage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the driver is for dry indoor locations only. Bathrooms require drivers rated IP44 or higher for zones 1 and 2, and IP65 for direct shower or bath splash zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dimmer switch is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver requires a 1-10V dimming controller or wall dimmer. Standard mains-voltage dimmers (trailing edge or leading edge) are not compatible. The 1-10V control wire connects to a separate low-voltage dimmer rated for 1-10V protocol.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733246533899,"sku":"287843","price":48.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/287843_WEB001_BENTO_DRIVER_09W_1_10V_a3b4af6b-f7e3-4137-bf78-7ea9c71125c8.jpg?v=1724720901","url":"https:\/\/niori.co.uk\/products\/voltis-9w-constant-current-dimmable-led-driver-1-10v-250ma","provider":"Niori","version":"1.0","type":"link"}