{"product_id":"voltis-13w-constant-current-led-driver-1-10v-dimmable-350ma","title":"Voltis 13W Constant Current LED Driver - 1-10V Dimmable, 350mA","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Voltis is a 13W constant current LED driver delivering 350mA output with 1-10V dimming control. The driver maintains a fixed current of 350mA across the connected LED load regardless of minor voltage fluctuations, which protects LED lifespan and prevents brightness variation. The white plastic housing measures 108mm x 52mm x 30mm and fits typical ceiling voids and recessed light housings.\u003c\/p\u003e\n\u003cp\u003eDesigned for indoor residential and commercial installations, the driver supports 1-10V dimming protocol, which requires a compatible 1-10V dimmer control on a separate low-voltage wire pair running from the dimmer to the driver. This dimming method is common in commercial lighting control systems and some higher-spec residential installations where smooth dimming performance is needed. The IP20 rating restricts use to dry indoor environments only.\u003c\/p\u003e\n\u003cp\u003eThe constant current design delivers a stable 350mA to the LED load, making it suitable for LED panels, downlights and strips that specify a 350mA drive current. The 13W maximum output allows the driver to power multiple low-wattage LEDs in series or a single higher-wattage LED module up to that limit. The push-fit terminals on the driver accept solid or stranded cable up to 1.5mm² for mains input and LED output connections.\u003c\/p\u003e\n\u003cp\u003eIdeal Lux backs the driver with a 5-year warranty covering component failure and manufacturing defects. The driver meets UK wiring regulations when installed by a qualified electrician and includes thermal overload protection that shuts down the output if the internal temperature exceeds safe operating limits.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength (mm)\u003c\/td\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection (mm)\u003c\/td\u003e\n\u003ctd\u003e52\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 1-10V dimming mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1-10V dimming is a commercial dimming protocol that uses a separate low-voltage control wire pair running from a 1-10V dimmer to the driver. The dimmer sends a signal voltage between 1V and 10V, with 10V representing maximum brightness and 1V representing minimum brightness. This requires a 1-10V compatible dimmer — standard household dimmers will not work with this driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LEDs can this driver power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver delivers a constant 350mA output, so it suits any LED load that specifies a 350mA drive current and has a total wattage of 13W or less. Common applications include LED downlights, LED panels and LED strip sections designed for constant current operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the driver is not protected against moisture ingress and must be installed in dry indoor locations only. For bathrooms, use an IP44-rated or higher driver positioned outside the bathroom zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere does the driver install?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver typically installs in a ceiling void, recessed light housing or control cabinet where access is available for wiring and future maintenance. The 108mm x 52mm footprint fits most standard downlight housings and allows the driver to be positioned close to the LED load.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733247222027,"sku":"287867","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/287867_WEB001_BENTO_DRIVER_13W_1_10V_PUSH_641ddfa6-c0b2-4365-a949-79a8157d03f7.jpg?v=1724720894","url":"https:\/\/niori.co.uk\/products\/voltis-13w-constant-current-led-driver-1-10v-dimmable-350ma","provider":"Niori","version":"1.0","type":"link"}