{"product_id":"unbranded-ac6v-100v-3-6w-ceiling-speaker","title":"Unbranded AC6V 100V 3-6W Ceiling Speaker","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AC6V is a flush-mount ceiling speaker built for background music and speech in commercial buildings. It fits neatly into suspended ceilings and holds in place with an inbuilt pair of easy-fit spring clamps, so a single installer can mount it without extra brackets. The frame and basket are moulded from ABS, and the grille is powder coated steel, giving a tidy finish that sits flush against the ceiling line.\u003c\/p\u003e\n\u003cp\u003eInside is a 6.5\" reinforced paper dual cone driver. The dual cone design widens the frequency range, helping the speaker carry both the lower body of music and the clarity of the spoken word across 100Hz to 18kHz. Sensitivity is rated at 92dB with a maximum SPL of 101dB, which suits the sort of even, steady coverage you want across a room or corridor rather than high-volume playback.\u003c\/p\u003e\n\u003cp\u003eThe AC6V runs on a 100V line system (also called a 100 volt line or constant voltage system), with selectable 3W and 6W power tappings so you can balance output across a chain of speakers. It also carries an 8 ohm impedance rating at 10W RMS if you prefer a low-impedance setup on shorter runs. The cutout is 170mm in diameter and the unit measures 65 x 187mm, weighing 590g. It works well anywhere you need clear, distributed audio, from retail and offices to reception areas and hospitality spaces.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS frame \u0026amp; basket with steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTappings\u003c\/td\u003e\n\u003ctd\u003e3W, 6W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e8 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower rms : 8 Ohms\u003c\/td\u003e\n\u003ctd\u003e10W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e100Hz - 18kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e92dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. SPL\u003c\/td\u003e\n\u003ctd\u003e101dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout\u003c\/td\u003e\n\u003ctd\u003e170mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e65mm x 187mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.59KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size cutout does the AC6V need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AC6V requires a 170mm diameter cutout. The speaker body measures 65 x 187mm, so allow depth clearance above the ceiling for the basket and driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the power tappings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt offers 3W and 6W tappings on a 100V line. You can select the tapping to balance loudness across a chain of speakers on the same line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as a standard 8 ohm speaker?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Alongside the 100V line tappings it carries an 8 ohm impedance rating at 10W RMS, so it can be wired into a low-impedance system on shorter cable runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it mount into the ceiling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses an inbuilt pair of spring clamps. Once the cutout is made, the clamps grip the ceiling material and pull the speaker flush, so no separate mounting frame is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for music as well as speech?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 6.5\" dual cone driver covers 100Hz to 18kHz, which handles background music and speech distribution. It is aimed at even coverage rather than high-volume output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the frame made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe frame and basket are ABS, with a powder coated steel grille. This keeps the weight low at 590g while giving a durable, tidy finish.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272106107147,"sku":"952.160UK","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/952160UK_0.jpg?v=1785050194","url":"https:\/\/niori.co.uk\/products\/unbranded-ac6v-100v-3-6w-ceiling-speaker","provider":"Niori","version":"1.0","type":"link"}