{"product_id":"track-adaptor-for-trk-systems-white","title":"Track Adaptor for TRK Systems - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge track adaptor is a white polycarbonate component that clips into TRK single-circuit track systems to mount pendant lights or provide a power feed point for accessories. The adaptor accepts flex cables between 1.5mm and 6mm diameter and supports a maximum load of 100W and 5kg per fitting, suitable for most domestic pendant shades and small track-mounted spotlights.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens, retail spaces and commercial installations where pendant lights need to be positioned within a track run rather than at fixed ceiling points, the adaptor allows a single track circuit to carry both directional spotlights and decorative pendants. The 40mm length and 37mm width match the standard profile of Knightsbridge TRK track, and the adaptor slides into position along the track before locking with a quarter-turn mechanism. The white finish matches Knightsbridge white track profiles and ceiling fixings.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate body and copper contact components are rated IP20 for indoor dry-location use. The adaptor carries Class I earthing and operates on 230V 50Hz mains, consistent with standard UK residential and commercial installations. Each adaptor weighs approximately 50g and adds minimal load to the track suspension.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e65 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e37 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e100 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4120127_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable size does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor accepts flex cables between 1.5mm and 6mm diameter, which covers standard pendant flex used in the UK. Most pendant lights with braided or PVC flex will fit without modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it installed in the track?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor slides into the TRK track channel, then locks in place with a quarter-turn rotation. Once locked, the pendant cable is threaded through and the electrical connection is made via the copper contacts inside the adaptor body.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat weight can it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum load is 5kg per adaptor. This covers most small to medium pendant shades, fabric drum pendants and glass globe pendants typically used in kitchens and dining areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with all TRK track systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, this adaptor is designed specifically for Knightsbridge TRK single-circuit track systems. It is not compatible with three-circuit or competitor track profiles.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294002995467,"sku":"TRKAD1W","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/497830_49002132-af67-4e3d-8e26-018f9789cb12.jpg?v=1714667219","url":"https:\/\/niori.co.uk\/products\/track-adaptor-for-trk-systems-white","provider":"Niori","version":"1.0","type":"link"}