{"product_id":"t8-led-tube-9w-95w-eq-g13-cool-white","title":"T8 LED Tube 9W 95W-eq G13 - Cool White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis T8 LED tube is a direct replacement for an old linear fluorescent tube, fitting the standard G13 two-pin cap at each end. It draws just 9W while putting out 1440 lumens, so it stands in for a 95W fluorescent tube on far less energy. The light is a 4000K cool white with a CRI of Ra 80, spread across a wide 220 degree beam for an even wash along the length of the fitting rather than a tight directional spot.\u003c\/p\u003e\n\u003cp\u003eIt suits utility and work spaces where a clean, neutral white helps with visibility: garages, workshops, stores, kitchens, utility rooms and corridors. Coverage runs evenly down the line of the fitting, so several tubes in a row give consistent overlapping light across a ceiling. The IP20 rating means it is for dry indoor use only, so keep it clear of bathrooms, porches and any damp or outdoor location. Mount it in an existing T8 batten or enclosure at normal ceiling height.\u003c\/p\u003e\n\u003cp\u003eThe tube measures 28mm in diameter by 28mm and weighs 112g, running on 220 to 240V AC. Like most LED retrofit tubes it bypasses the old ballast arrangement, so any existing starter should be removed and the fitting checked against the wiring guidance before fitting. Rated for 30,000 hours, it is a non-dimmable tube finished in white. The wider T8 LED tube range covers other lengths and outputs in matching cool white.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCap \/ fitting\u003c\/td\u003e\n\u003ctd\u003eG13 (T8 tube)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb shape\u003c\/td\u003e\n\u003ctd\u003eTube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e9 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplaces\u003c\/td\u003e\n\u003ctd\u003e95 W incandescent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous flux\u003c\/td\u003e\n\u003ctd\u003e1440 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency\u003c\/td\u003e\n\u003ctd\u003e160 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour temperature\u003c\/td\u003e\n\u003ctd\u003e4000K (Cool White)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour rendering (CRI)\u003c\/td\u003e\n\u003ctd\u003eRa 80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated life\u003c\/td\u003e\n\u003ctd\u003e30000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-33210-spec.pdf?v=1782113348\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-33210-datasheet.pdf?v=1782113348\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eWhich fitting does this T8 tube need?\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses the G13 two-pin cap found on standard T8 linear fluorescent fittings, with a pin at each end of the tube. It is a straight retrofit for an old T8 fluorescent tube of the same length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eWhat old tube wattage does it replace?\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe tube draws only 9W of actual power yet gives 1440 lumens, which is equivalent to a 95W fluorescent tube. You get the same brightness for a fraction of the running cost.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eDo I need to remove the starter or bypass the ballast?\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. As an LED tube it does not work through the old fluorescent ballast and starter, so the starter should be removed and the fitting wired to the supplied guidance. Have the work checked by a competent electrician if you are unsure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eWhat colour and brightness does it give?\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt produces 1440 lumens of 4000K cool white light with a CRI of Ra 80, spread over a 220 degree beam. The neutral white tone suits garages, workshops and utility areas where clear, even light matters.\u003c\/p\u003e\n","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53198139785483,"sku":"33210","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/33210.jpg?v=1782113728","url":"https:\/\/niori.co.uk\/products\/t8-led-tube-9w-95w-eq-g13-cool-white","provider":"Niori","version":"1.0","type":"link"}