{"product_id":"t8-led-tube-22w-192w-eq-g13-linear-cool-white","title":"T8 LED Tube 22W 192W-eq G13 Linear - Cool White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe T8 LED Tube is a linear LED replacement for a standard fluorescent strip, fitted with the familiar G13 two-pin cap at each end. It draws just 22W yet delivers 3300 lumens, standing in for an older 192W fluorescent tube at a fraction of the energy. The light is a 4000K cool white with a CRI of Ra 80, spread across a wide 220 degree beam so the output washes evenly rather than spotting. American buyers will know this format simply as a T8 tube light.\u003c\/p\u003e\n\u003cp\u003eIts even, glare-free spread suits utility and work spaces such as garages, workshops, store rooms, stairwells and commercial corridors, where a long run of light is wanted overhead. As a linear tube the coverage runs the length of the fitting rather than pooling, so the cool 4000K tone keeps surfaces and surroundings clearly lit for general visibility and task work. Being IP20 rated, it is for dry indoor positions only and should be kept clear of bathrooms, damp areas and any outdoor location. The 220-240V AC operation and 150 lm\/W efficiency make it a straightforward swap into existing tube fittings.\u003c\/p\u003e\n\u003cp\u003eThe tube measures 28mm in diameter by 28mm and weighs 210g, with a white finish housing the T8 LED source. Depending on the existing gear, the fluorescent starter is removed and the ballast bypassed before fitting, so check the wiring guidance for your luminaire. The lamp is non-dimmable and is rated for 30,000 hours of use. We also stock matching tube fittings and other G13 lengths across the range.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCap \/ fitting\u003c\/td\u003e\n\u003ctd\u003eG13 (T8 tube)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb shape\u003c\/td\u003e\n\u003ctd\u003eTube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e22 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplaces\u003c\/td\u003e\n\u003ctd\u003e192 W incandescent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous flux\u003c\/td\u003e\n\u003ctd\u003e3300 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency\u003c\/td\u003e\n\u003ctd\u003e150 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour temperature\u003c\/td\u003e\n\u003ctd\u003e4000K (Cool White)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour rendering (CRI)\u003c\/td\u003e\n\u003ctd\u003eRa 80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated life\u003c\/td\u003e\n\u003ctd\u003e30000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-26058-spec.pdf?v=1782113350\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-26058-datasheet.pdf?v=1782113349\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich fitting does this tube need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses a G13 cap, the standard two-pin base found on T8 fluorescent tubes. It drops into any compatible T8 batten or tube fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat old tube wattage does it replace?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LED draws only 22W but gives the light output of an old 192W fluorescent tube, around 3300 lumens. That is a large energy saving for the same level of brightness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to remove the starter or change the wiring?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDepending on the existing fitting, the fluorescent starter is removed and the ballast bypassed before installation. Follow the wiring guidance for your luminaire, or have a qualified electrician carry out the change.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this tube be dimmed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, this T8 LED tube is non-dimmable and should be run on a standard non-dimming circuit. It produces a fixed 4000K cool white output.\u003c\/p\u003e\n","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53198140145931,"sku":"26058","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/26058.jpg?v=1782113732","url":"https:\/\/niori.co.uk\/products\/t8-led-tube-22w-192w-eq-g13-linear-cool-white","provider":"Niori","version":"1.0","type":"link"}