{"product_id":"steel-suspension-kit-1-5m-for-batten-lights","title":"Steel Suspension Kit 1.5m for Batten Lights","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\u003cp\u003eThis steel kit lets you hang a batten light from the ceiling on steel cable, rather than fixing it flat against the surface. It brings together steel cable with cable grippers, dome caps, threaded bushes, hex nuts and toothed washers, all in a bright silver colour that sits neatly with the clean lines of a modern batten. The kit is 1.5m long, measuring 1500mm from end to end and 11mm wide and deep at its largest part, and it weighs just 0.08KG, so it is light and easy to handle up a ladder. It comes with a 5-year extended warranty.\u003c\/p\u003e\u003cp\u003eHanging a batten brings its light down from a high ceiling towards the work beneath, which is why we see kits like this most often in warehouses, workshops, stockrooms and offices with high or open ceilings. It suits trade customers fitting out a commercial unit just as well as home customers lighting a workshop, and a run of battens hung on steel cable gives a tidy, industrial look over benches, aisles and desks. Because the light now hangs closer to the task, it falls more directly where it is needed, rather than being lost in the space overhead.\u003c\/p\u003e\u003cp\u003eEvery part of the kit is steel, from the cable itself to the grippers, caps, bushes, nuts and washers, so the whole set is made from one material and looks consistent once hung. It fits LED batten lights, and it is made to carry one below the ceiling on cable rather than fixed directly to it. The batten itself is a mains fitting, so it is installed by a qualified electrician, and the kit is put up as part of that same job. With the batten hung, you get a clean, simple line of light at a working height, held on slim steel cable that keeps the look light and uncluttered.\u003c\/p\u003e\u003ch5\u003eSpecification\u003c\/h5\u003e\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e1500 x 11 x 11mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 years (extended)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.08KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eDownloads\u003c\/h5\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/BTSK1_DS.pdf?v=1794536692\" target=\"_blank\"\u003eSpecification Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/BTSK1_INS.pdf?v=1794536701\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\u003cp\u003e\u003cstrong\u003eHow long is this batten hanging kit?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is 1.5m long, measuring 1500mm from end to end, and it is 11mm wide and deep at its largest part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the kit made of?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery part is steel, from the cable to the grippers, caps, bushes, nuts and washers, and the whole kit weighs just 0.08KG.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the batten light included with the kit?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo. This is the hanging kit alone, made up of steel cable and its fittings, ready to carry a batten you already have or are buying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere would a hanging batten work best?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWe see hung battens most often indoors in warehouses, workshops, stockrooms and offices with high or open ceilings, where lowering the light brings it closer to the work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho should put the kit up?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe batten is a mains fitting, so it is installed by a qualified electrician, and the kit is put up as part of that same job.\u003c\/p\u003e","brand":"Collingwood Lighting","offers":[{"title":"Default Title","offer_id":53530797506827,"sku":"BTSK1","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/steel-suspension-kit-1-5m-for-batten-lights-01.jpg?v=1794561109","url":"https:\/\/niori.co.uk\/products\/steel-suspension-kit-1-5m-for-batten-lights","provider":"Niori","version":"1.0","type":"link"}