{"product_id":"sparx-59w-constant-voltage-led-driver-1-10v-dimmable","title":"Sparx 59W Constant Voltage LED Driver - 1-10V Dimmable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Sparx is a 59W constant voltage LED driver with 1-10V dimming protocol, housed in a 280mm white metal case with terminal connections at one end. The driver converts mains AC to stable DC output at constant voltage, suitable for powering LED strip installations, architectural lighting runs and multi-fixture LED arrays where individual fixtures expect regulated DC input rather than mains voltage.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial and residential installations requiring dimming control, the driver accepts a 1-10V control signal from compatible dimmer modules or building management systems. The 1-10V protocol allows stepless dimming from 100% down to approximately 10% output without flicker, covering the range needed for task lighting, accent lighting and general ambient control in offices, retail environments, hospitality spaces and residential living areas. The constant voltage architecture ensures all connected LED fixtures receive the same stable voltage regardless of load, preventing uneven brightness across a run.\u003c\/p\u003e\n\u003cp\u003eThe 280mm length and 21mm depth allow the driver to be installed in ceiling voids, behind panels or within joinery where mains wiring terminates and DC output begins. The IP20 rating suits dry indoor environments only — not suitable for bathrooms, outdoor use or any location where moisture is present. The white powder-coated metal case provides passive cooling via convection, and the driver carries a 5-year warranty from Ideal Lux covering manufacturing defects and component failure under normal operating conditions.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength (mm)\u003c\/td\u003e\n\u003ctd\u003e280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection (mm)\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 1-10V dimming mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1-10V is a control protocol where a separate low-voltage control wire carries a signal between 1V and 10V to set the dimming level. At 10V the driver outputs 100% power; at 1V it outputs approximately 10%. This requires a compatible 1-10V dimmer module or control system — standard UK trailing-edge dimmers will not work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this driver be used outdoors or in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the driver is not protected against moisture ingress and must only be installed in dry indoor locations away from water, condensation and external weather exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LED fixtures can it power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Sparx 59W driver is designed for constant voltage LED products that expect DC input, including LED strip lighting, architectural LED modules and multi-fixture runs where individual fixtures are wired in parallel. It is not suitable for mains-voltage LED bulbs or fittings that contain their own internal drivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens if the load exceeds 59W?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOperating the driver beyond its 59W rated capacity will cause overheating, premature component failure and may trigger thermal protection shutdown. Calculate the total wattage of all connected LED fixtures and ensure the combined load stays below 59W with headroom for safety.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733171527947,"sku":"270883","price":193.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/270883_WEB001_FLUO_BIEMISSION_1800_KIT_DRIVERS_1_10V_400b28c2-0fe8-43e3-8b6a-5a2522845053.jpg?v=1724717728","url":"https:\/\/niori.co.uk\/products\/sparx-59w-constant-voltage-led-driver-1-10v-dimmable","provider":"Niori","version":"1.0","type":"link"}