{"product_id":"spark-60w-constant-current-led-driver-1400ma-1-10v-dimmable","title":"Spark 60W Constant Current LED Driver 1400mA 1-10V Dimmable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Spark is a 60W constant current LED driver from Ideal Lux, delivering 1400mA output with 1-10V analogue dimming control. The driver regulates current rather than voltage, maintaining stable light output across LED loads without flicker or colour shift as the dimmer level changes. The plastic housing measures 124mm x 82mm x 41mm and fits into ceiling voids, behind panels, or inside lighting enclosures where space is limited.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial installations, retail lighting, hospitality projects and residential downlight arrays where multiple LED fittings share a single driver, the Spark pairs with LED fixtures rated for 1400mA constant current operation. The 1-10V dimming interface connects to a separate wall-mounted dimmer or building management system, allowing brightness to be controlled from 10-100% without cutting power to the driver. The IP20 rating restricts use to dry indoor locations.\u003c\/p\u003e\n\u003cp\u003eThe constant current output means the driver automatically adjusts voltage to maintain 1400mA regardless of the number of LEDs wired in series, within the 60W power budget. This prevents overcurrent damage to the LEDs and delivers consistent brightness across all fittings in a circuit. The plastic enclosure includes knockout entry points for cable routing and metal mounting clips that secure the driver to a ceiling joist or panel frame. Ideal Lux backs the Spark with a 5-year warranty covering component failure and thermal performance degradation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength (mm)\u003c\/td\u003e\n\u003ctd\u003e124\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection (mm)\u003c\/td\u003e\n\u003ctd\u003e82\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LEDs is this driver compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Spark is compatible with LED fixtures rated for 1400mA constant current operation. Check the LED fixture datasheet to confirm it specifies 1400mA drive current. The total wattage of all connected LEDs must not exceed 60W.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does 1-10V dimming work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1-10V is an analogue dimming protocol requiring a separate low-voltage control wire run from a compatible wall dimmer or control system to the driver. The control voltage varies between 1V (minimum brightness, typically 10%) and 10V (full brightness). The driver interprets this signal and adjusts LED output accordingly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors or in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the driver is not protected against moisture ingress and must be installed in dry indoor locations only. For outdoor or bathroom installations, specify a driver with IP65 or IP67 rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the input voltage requirements?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe label visible in the image indicates the driver accepts 220-240V AC mains input at 50\/60Hz. Always verify input voltage compatibility with your mains supply before installation.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733166743819,"sku":"270340","price":94.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/270340_WEB001_FLY_D60_DRIVER_1_10V_60W_1400mA_4a209121-2c09-4484-9873-7eeb2ee2d2f2.jpg?v=1724711132","url":"https:\/\/niori.co.uk\/products\/spark-60w-constant-current-led-driver-1400ma-1-10v-dimmable","provider":"Niori","version":"1.0","type":"link"}