{"product_id":"spark-100w-constant-current-dimmable-led-driver-1400ma","title":"Spark 100W Constant Current Dimmable LED Driver - 1400mA","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Spark is a 100W constant current LED driver delivering 1400mA output, designed to power mid- to high-output LED fixtures with 1-10V dimming control. The driver maintains a stable current regardless of load variance, preventing flicker and ensuring consistent light output across the connected LED array. Housed in a compact plastic case measuring 140mm x 100mm x 30mm, the unit fits standard ceiling voids and shallow mounting positions.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial, hospitality and residential installations where dimming control is required, the Spark pairs with 1-10V compatible dimmers to reduce light output from 100% down to approximately 10% of full brightness. The constant current regulation suits LED fixtures specified for 1400mA operation, providing the correct drive current regardless of minor voltage fluctuations on the mains supply. The IP20 rating limits the driver to dry indoor locations — offices, retail spaces, homes, hotels, restaurants and similar environments.\u003c\/p\u003e\n\u003cp\u003eThe plastic enclosure dissipates heat passively through ventilation slots on the upper and lower faces, requiring no forced cooling or minimum clearance above the typical 50mm found in most ceiling voids. Input wiring accepts 220-240V AC mains on push-fit terminals, with output terminals providing the regulated 1400mA DC feed to the LED load. The 100W capacity suits fixtures drawing between 70-100W at the 1400mA operating current, giving headroom for inrush current on switch-on without tripping protection circuits.\u003c\/p\u003e\n\u003cp\u003eIdeal Lux backs the Spark with a 5-year warranty covering component failure and output degradation. The driver carries CE certification and complies with EN 61347 safety standards for LED control gear.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength (mm)\u003c\/td\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection (mm)\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dimming protocol does the Spark use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver accepts 1-10V dimming control, the most common protocol for commercial LED installations. A separate 1-10V dimmer module is required — the driver does not dim from a standard phase-cut wall dimmer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LED fixtures is this suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Spark suits any LED fixture or array specified for 1400mA constant current operation, with a total power draw between 70-100W. Check the fixture datasheet to confirm the required drive current matches 1400mA before pairing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be mounted in a ceiling void?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The compact 140mm x 100mm footprint and passive cooling design allow the driver to be mounted in standard ceiling voids with typical clearances above 50mm. Ensure adequate ventilation around the unit and avoid covering the heat dissipation slots.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Spark suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating limits the driver to dry indoor locations only. For outdoor LED installations, an IP65 or IP67 rated driver is required.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45767507214603,"sku":"270388","price":151.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/270388_WEB001_FLY_D90_DRIVER_DALI_PUSH_100W_1400mA_412bbfcd-ac90-41b7-b3ed-b5cd4ba8ee80.jpg?v=1724711145","url":"https:\/\/niori.co.uk\/products\/spark-100w-constant-current-dimmable-led-driver-1400ma","provider":"Niori","version":"1.0","type":"link"}