{"product_id":"single-4ft-t8-led-ready-batten-without-ballast-white","title":"Single 4ft T8 LED-Ready Batten Without Ballast - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge T8LB14 is a 1225mm single-tube batten fitting pre-wired for T8 LED tubes with internal ballasts. The fitting ships without a ballast or driver, making it incompatible with fluorescent tubes but ready for direct connection to self-ballasted LED T8 tubes that run on mains voltage.\u003c\/p\u003e\n\u003cp\u003eDesigned for workshops, garages, utility rooms, storage areas and back-of-house commercial spaces where functional task lighting is needed without decorative finish, the batten mounts directly to ceilings or walls using fixing points at each end. The white pressed-steel construction provides durability in non-corrosive indoor environments rated IP20.\u003c\/p\u003e\n\u003cp\u003eThe 1225mm length accommodates standard 4ft (1200mm) T8 LED tubes. The 63mm width and 80mm projection keep the fitting compact enough for low ceilings and confined spaces. Class I earthing is required on installation. The tube is sold separately, giving flexibility to choose the colour temperature, lumen output and beam angle that suits the application.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1225 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e63 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eT8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1621627_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this batten work with fluorescent tubes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The batten is supplied without a ballast or driver, which are necessary for fluorescent operation. It only works with self-ballasted T8 LED tubes that run directly on 230V mains voltage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tube does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe batten takes a standard 1200mm (4ft) T8 LED tube with an internal ballast. Tubes are sold separately. Most users pair this with a 16-20W LED tube in 4000K or 6500K for workshop and garage applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the tube dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming capability depends on the specific T8 LED tube you install. The batten itself does not include dimming electronics. Check the tube specification before pairing with a dimmer circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the IP rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP20, meaning the fitting is suitable for dry indoor locations only. It is not rated for damp environments, bathrooms or outdoor use.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293992018187,"sku":"T8LB14","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/110312_66af0a3e-13be-43ab-9354-4ae26df14bce.jpg?v=1714667154","url":"https:\/\/niori.co.uk\/products\/single-4ft-t8-led-ready-batten-without-ballast-white","provider":"Niori","version":"1.0","type":"link"}