{"product_id":"single-2ft-t8-led-ready-non-corrosive-batten-ip65-grey-polycarbonate","title":"Single 2ft T8 LED Ready Non-Corrosive Batten IP65 - Grey Polycarbonate","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge NCLB12 is a 2ft (653mm) single-tube non-corrosive batten fitting rated IP65 for dust-tight and water-jet-protected installation. The grey polycarbonate body and prismatic polycarbonate diffuser enclose a pre-wired T8 lampholder designed for self-ballasted LED tubes. Unlike traditional fluorescent battens, this fitting has no ballast or driver inside, so it requires a dedicated T8 LED tube with an integrated driver to function.\u003c\/p\u003e\n\u003cp\u003eDesigned for industrial, commercial and agricultural environments where moisture, dust and impact are concerns, the IP65 rating allows the fitting to be installed in wash-down areas, cold stores, agricultural sheds, garages and covered outdoor canopies. The polycarbonate body resists impact and corrosion better than steel or aluminium enclosures in damp or chemically aggressive atmospheres. The fitting is supplied pre-wired with two clip-in endcaps that hold the tube securely once inserted.\u003c\/p\u003e\n\u003cp\u003eThe 653mm overall length and 94mm width give the batten a compact profile suitable for ceiling and wall mounting in confined spaces. The prismatic diffuser spreads the light output from the tube across a wider angle than a clear cover would, reducing glare and hot-spots on work surfaces below. The fitting carries a Class I earth connection and a 3-year warranty. T8 LED tubes are sold separately and must be self-ballasted types compatible with direct mains connection.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e653 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e94 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eT8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2188720_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_771176.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat type of LED tube does this fitting require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NCLB12 is pre-wired for self-ballasted T8 LED tubes that connect directly to 230V mains. These tubes have the driver built into the tube itself. Standard fluorescent T8 tubes and LED tubes designed for use with external ballasts will not work in this fitting. The tube is sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP65 mean in practice?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 means the fitting is dust-tight (no ingress of dust) and protected against water jets from any direction. This makes it suitable for wash-down areas, damp workshops, cold stores, covered outdoor canopies and agricultural buildings. It is not submersible and should not be used in locations where it would be fully immersed in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be dimmed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming capability depends entirely on the T8 LED tube you install. Some self-ballasted T8 LED tubes support dimming, while others do not. Check the tube specification before pairing with a dimmer circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the diffuser removed for tube replacement?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe prismatic polycarbonate diffuser clips into the body and can be unclipped by hand to access the tube. No tools are required for routine tube replacement, though initial wiring installation requires a screwdriver to access the terminal block inside the fitting.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293904691467,"sku":"NCLB12","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/129098_e9e1ed04-ea17-4a02-a60c-6b6207856122.jpg?v=1714665953","url":"https:\/\/niori.co.uk\/products\/single-2ft-t8-led-ready-non-corrosive-batten-ip65-grey-polycarbonate","provider":"Niori","version":"1.0","type":"link"}