{"product_id":"single-2ft-t8-led-ready-non-corrosive-batten-fitting-ip65-grey","title":"Single 2ft T8 LED Ready Non-Corrosive Batten Fitting IP65 - Grey","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge NCLB22 is a 653mm single T8 LED-ready batten fitting housed in a grey polycarbonate body with an IP65-rated seal against dust and water jets. The fitting accepts one 2ft (600mm) T8 LED tube and comes pre-wired without a ballast or driver, designed exclusively for use with self-ballasted T8 LED tubes that connect directly to 230V mains.\u003c\/p\u003e\n\u003cp\u003eBuilt for industrial and commercial environments where moisture, dust and impact are daily concerns — warehouses, workshops, garages, cold stores, covered car parks, agricultural buildings — the polycarbonate body and prismatic diffuser resist cracking under impact and maintain the IP65 seal even after repeated knocks. The fitting mounts to a ceiling or wall using two fixing points spaced 590mm apart, with cable entry via knock-out glands on either end cap.\u003c\/p\u003e\n\u003cp\u003eThe prismatic diffuser spreads light output evenly across a wide beam, reducing harsh shadows under the tube whilst maintaining enough light transmission for task visibility. The grey polycarbonate finish blends into industrial settings without drawing attention, and the impact-resistant construction handles the kind of rough treatment common in working environments where fittings are knocked by ladders, trolleys and building materials.\u003c\/p\u003e\n\u003cp\u003eLED tubes are sold separately. The fitting is Class I and requires an earth connection. Dimming capability depends on whether the chosen T8 LED tube supports dimming — the fitting itself imposes no restriction but provides no active dimming circuitry.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e653 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e129 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eT8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2188783_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_771184.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat T8 LED tube does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes one 2ft (600mm) T8 LED tube with a self-ballast (also called direct-to-mains or ballast-bypass tubes). The fitting has no ballast or driver inside — the tube connects directly to 230V. Standard fluorescent T8 tubes will not work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating protects against dust and water jets, making it suitable for covered outdoor areas like car ports, loading bays and canopies. It is not rated for full exposure to rain or submersion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be dimmed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends entirely on whether the T8 LED tube you install supports dimming. The fitting itself has no dimming circuitry — it passes mains voltage directly to the tube. If the tube is dimmable, pair the fitting with a compatible wall dimmer rated for LED loads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the diffuser removed for tube replacement?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate diffuser clips onto the body and is held by spring clips at each end. Push the clips inward to release the diffuser, then lift it away to access the tube. Re-clip the diffuser after replacing the tube.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293905084683,"sku":"NCLB22","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/129106_ebb4966b-6a71-42e9-b882-cfc01f35352d.jpg?v=1714665962","url":"https:\/\/niori.co.uk\/products\/single-2ft-t8-led-ready-non-corrosive-batten-fitting-ip65-grey","provider":"Niori","version":"1.0","type":"link"}